Laserfiche WebLink
1 <br />1 <br />1 <br />I <br />1 <br />F <br />i <br />N <br />O'tV�M11lt'. �� r <br />PEDESTRIAN BRIDGE ABUTMENTS <br />Concrete, Tilt up or Cast -In Place wall abutments are being proposed in lieu of the prefabricated. We have been able to identify <br />that prefabricating the abutments and elevator shafts would be substantially more expensive since it would be a custom made <br />item. Furthermore, this would allow us to start with the construction of the abutments and the elevator shafts before the <br />fabrication of the bridge is completed. Note that Stantec has identified that the abutment will require pre - stressed piles. <br />BRIDGE LIGHTING <br />The prefabricated bridge will be provided with LED lights within the pre - fabricated steel bridge as shown on the picture below. <br />This is a similar project which was recently completed by Anzac at the Coco Plum Circle Pedestrian Bridge. <br />iBRIDGE ELEVATORS <br />The Design/Build Team is proposing an elevator at each end to comply with ADA since we will be unable to provide an approach <br />with the proper slopes that comply with ADA due to the space constraints. As a result, we are proposing a standard size 5'x7' size <br />elevator with glass on three sides. The elevator will have a load capacity of 2,100 Ibs with a stainless steel door. In addition, <br />adjacent to the elevator shaft and the abutment, there will be an elevator room. Our Elevator Subcontractor has indicated that <br />they will take care of the State Permit for the elevator. <br />1 <br />1 <br />1 66 <br />