Laserfiche WebLink
Scissor Lift SLX by Draper page 8 of 8 <br />www.draperinc.com (765) 987-7999 <br />Installing Optional Environmental Air Space Housing <br /> The Environmental Air Space Housing is shipped in pieces, and must be <br />assembled by the installer. The height of the Environmental Air Space Hous- <br />ing is set by drilling out the knockouts at the desired locations then using <br />screws to connect side panels. It is recommended that an access panel be <br />installed in the ceiling to allow future access. The optional Environmental Air <br />Space Housing must be installed per instructions to isolate the lift from the <br />“other space used for environmental air.” Includes trim ring for ceiling opening. <br />Caution: Be careful when handling Environmental Air Space <br />Housing Panels. The panels could have sharp edges. <br />11 <br />11 11 <br />11 <br />11 <br />11 11 <br />7 <br />11 <br />1 <br />3 <br />5 <br />9 3 <br />910 <br />2 <br />4 <br />6 <br />3 <br />4 <br />3 <br />8 <br />5 <br />FRONT/BAC <br />K <br />SIDE <br /> Item Qty Part number Description <br /> 1 1 C028.544.02SA Frame, SLX Plenum <br /> 2 1 C028.545.07SA Frame, SLX Trim Ring <br /> 3 4 C044.178SA Panel, SLX Plenum Side <br /> 4 4 C044.180SA Panel, SLX Plenum End <br /> 5 2 C044.179SA Panel, SLX Middle End <br /> 6 2 C044.177SA Panel, SLX Plenum Middle Side <br /> 7 1 C095.123SA Cover, SLX Plenum <br /> 8 28 C020.325 Screw, 8-32 x 3/8" Type 1 HWH <br /> 9 40 C018.051 Nut #8-32 Zinc Hex KEPS <br /> 10 12 C013.070 Washer, .188 I.D. x .5 O.D. x .07" TK Nylon Flat <br /> 11 24 C020.112 Screw, 8-32 x 3/8" Type F HWH <br />Do not use <br />electrical knockouts <br />on bottom sections <br />1 Attach Environmental Air Space Housing top frame to top of Scissor Lift <br /> SLX with bolts provided. <br />2 Install top panel to Environmental Air Space Housing frame. <br />3 Attach assembly to overhead structure. Allow clearance between Environ- <br /> mental Air Space Housing top and structure for ease of future access. <br />4 Install side and end panels, and trim frame. <br />Please Note: The factory wiring of 'UP' Limit Switch MUST ALWAYS <br /> be used when SLX is installed in Environmental Air Space Housing <br /> and Optional Ceiling Closure. <br />See installation instructions included with Environmental Air Space Housing. <br />Knockouts