Laserfiche WebLink
NOTE: <br />• (20x) Lever Lock plate washers (K) are provided for equipment mounting convenience. <br />• Lever Lock plates may be installed on the side brackets at 3 different depths. All 4 corners of a <br /> Lever Lock plate must be inserted into the side brackets at the same depth in order to function <br /> correctly. (FIGURE M) <br />FIGURE M <br />Three <br />Depths <br />All 4 Corners on <br />the Same Depth <br />Page 12 <br />NOTE: Different sized Lever Lock plates may be used and components may be installed in a variety of <br />configurations. The following procedure is meant to show the 4” Lever Lock plate (B) installation to get <br />you started. <br />1. Insert the side of the 4” horizontal Lever Lock plate (J) without the clip into the brackets on the <br />back of the box first. Then install the side with the clip until it clicks into place. (FIGURE L) <br />INSTALLING LEVER LOCK PLATES <br />FIGURE L <br />Bottom <br />Clip <br />Side Brackets <br />Side with <br />clip <br />Side without <br />clip J