Laserfiche WebLink
www.shure.com ©2015 Shure Incorporated <br />SM35 Performance Headset Condenser Microphone <br />SM35 <br />Product Specifications <br />Type Electret Condenser <br />Frequency Response 40 Hz to 20,000 Hz <br />Polar Pattern Unidirectional (Cardioid) <br />Output Impedance <br />@ 1 kHz <br />2400 Ω <br />Audio Output Level -59.0 dBV/Pa <br />Signal-To-Noise Ratio[1] <br />@ 1 kHz <br />55 dB <br />Maximum SPL[1] <br />1000 Ω load, @ 1% THD <br />153.0 dB <br />Dynamic Range[1] <br />@ 1 kHz, 1000 Ω load <br />114.0 dB <br />Equivalent Output Noise[1] <br />Typical, A-Weighted <br />39 dB <br />Power Requirements +5 V DC (nominal), 10 V maximum (DC bias) <br />Polarity Positive pressure on diaphragm produces positive voltage on pin 3 with respect to pin 1 <br />Cable 1.1 m (45 in.) <br />Connector TA4F <br />Net Weight 72 g (2.53 oz.) <br />[1]Measurements taken using RPM626 preamp <br />* All specifications measured with a 48 VDC phantom power supply. The microphone operates at lower voltages, but with slightly decreased headroom and sensitivity. <br />Specifications <br />Overview <br />The new SM35 headset condenser microphone from Shure gives multi-instrumentalists the freedom to express themselves without having to sacrifice the <br />sound quality found in traditional microphones. A tight, unidirectional (cardioid) pickup pattern provides excellent rejection of off-axis sound sources to prevent <br />feedback and signal bleed for superior performance on stage. Standard TA4F (TQG) connectivity seamlessly integrates into any Shure wireless bodypack <br />system, and its availability in a number of bundled systems makes it appropriate for any stage, ranging from small clubs to large installations and arena tours. <br />The SM35-XLR (optional) includes an inline RPM626 preamp for use in standard wired (XLR) applications. <br />Features <br />• Wearable wireframe headset fits securely and comfortably for active performers and multi-instrumentalists <br />• Tight, unidirectional (cardioid) condenser pickup pattern rejects signal bleed and feedback for use on loud stages and behind floor monitors <br />• Flexible gooseneck design allows for optimized placement to further improve source isolation <br />• Lightweight and low-profile form enables comfortable, long-wearing use <br />• TA4F connector compatible with any Shure wireless bodypack system <br />• Included in a wide variety of Shure wireless systems, renowned for their ease of use and reliable performance <br />• Locking snap-fit windscreen tames plosive, breath and wind noise for clean and intelligble sound <br />• Tailored frequency response refined for clear, crisp vocal reproduction <br />• Legendary Shure precision engineering for durability and performance <br />Available Models <br />Optional Accessories <br />RK378 Replacement kit with clip + 2 snap-fit foam windscreens <br />RK183WS Replacement snap-fit foam windscreens (4 per pkg.) <br />Frequency Response <br />20 <br />15 <br />10 <br />5 <br />0 <br />-30 <br />-25 <br />-20 <br />-15 <br />-10 <br />-5dB <br />Hz20100 1k 10k 20k <br />0.6 m (2 ft.) from sound source 1 cm (0.4 in) from sound source <br />Polar Patterns <br />250 Hz <br />125 Hz <br />500 Hz <br />5,000 Hz <br />10,000 Hz <br />1,000 Hz <br />SM35-TQG Headset Cardioid Condenser Microphone with Snap-fit Windscreen and TA4F (TQG) Connector <br />SM35-XLR Headset Cardioid Condenser Microphone with Snap-fit Windscreen and Inline XLR Preamp <br />BLX1288/SM35 BLX Dual-Channel Wireless Combo System <br />BLX14/SM35 BLX Wireless Headset System <br />BLX188/SM35 BLX Dual-Channel Wireless Headset System <br />BLX14R/SM35 BLX Rack-Mounted Wireless Headset Systemv <br />GLXD14/SM35 GLX-D Digital Wireless Headset System <br />SLX14/SM35 SLX Wireless Headset System <br />ULXD14/SM35 ULX-D Digital Wireless Headset System <br />ULXP14/SM35 ULX Professional Wireless Headset System <br />ULXS14/SM35 ULX Standard Wireless Headset System