Laserfiche WebLink
PDR Series Installation Instructions <br />10 <br />Adjusting the Swing Arms Off Center <br />1. Remove the display from the mount. <br />2. Loosen four bolts (two on the top and two on the bottom) <br />securing the swing arm assembly to the top and bottom <br />mounting brackets (See Figure 12). <br />3. Move the swing arm assembly to desired location. <br />4. Tighten the bolts. <br />5. Install the display on the mount. <br />Figure 12 <br />Reconfiguring the Swing Arms to the Left or Right of <br />Center <br />1. Remove the display from the mount. <br />2. Remove four bolts (two on the top and two on the bottom) <br />securing the swing arm assembly to the top and bottom <br />mounting brackets. <br />WARNING:The next step will release the arm assembly <br />from the mount. The arms and plate may fall if you are not <br />careful. <br />3. Move the swing arm assembly to desired location. <br />•Left of Center (See Figure 13). <br />•Right of Center (See Figure 14). <br />4. Install retaining pin assemblies (one top and one bottom) <br />and secure using two bolts (one top and one bottom). <br />5. Install four bolts (two on the top and two on the bottom) to <br />secure the swing arm assembly to the top and bottom <br />mounting brackets. <br />6. Tighten the bolts. <br />7. Install the display on the mount. <br />Figure 13 <br />Figure 14 <br />Top Bolts <br />Top Bolts <br />Top Bolts