Laserfiche WebLink
FT2-700-ELEC Series FlipTop™ FT2 Series, 700 Size, Electrical <br />crestron.com | 800.237.2041 <br />device beneath the table. The shelf attaches to any side of the FlipTop <br />chassis below the table. Two shelves may be installed on opposing sides of <br />the chassis. <br />Note: See also the FT2-700-MECH series “Mechanical” FlipTops for a lower <br />cost alternative with reduced features and options. <br />SPECIFICATIONS <br />Modules <br />Modules Spaces: 12 (2 rows of 6) <br />Cable Pass-Through Plates: Accommodates up to 12 FT2A-PLT-PT <br />series cable pass-through plate modules (8 are included); each module <br />accommodates one FT2A-CBL-PT series pass-through cable (sold <br />separately) or other interface cable <br />Cable Retractors: Accommodates up to 6 FT2A-CBLR-1T series one-touch <br />cable retractors or FT2A-CBLR-GR series gravity cable retractors; each <br />retractor occupies 2 module spaces; mid-row positions require additional <br />brackets [3] <br />Connector Plates: Accommodates up to 12 FT2A-CP series connector <br />plate modules <br />Keystone Plates: Accommodates up to 12 FT2A-PLT-KEY series keystone <br />plate modules [4] <br />USB Rapid Chargers: Accommodates up to 2 FT2A-CHGR-USBA/C USB <br />rapid charging modules (maximum one per row) [2] <br />Blank Plates: Any unused module space can be filled with one <br />FT2A-PLT-BLANK series blank plate module (4 are included) <br />AC Power Outlet Modules: Accepts a variety of FT2A-PWR series AC <br />power outlet modules; refer to the spec sheet for each FT2A-PWR model <br />for module space requirements <br />Utility Shelves <br />Accommodates up to 2 FT2A-UTK-SHELF under-table utility shelves <br />attached to the left and/or right side, or to the front and/or rear side, <br />beneath the table (a shelf cannot be installed on the same side as a cable <br />retractor or power supply) <br />Connectors (on chassis) <br />DC Power: (2) 2.1 x 5.5 mm DC power connectors; <br />24 Volt DC power inputs (one per each row of modules); <br />A single FT2A-UTK-PWS power supply and Y-adapter cable are included <br />to power both inputs, a second power supply may be purchased to power <br />each input separately if required [2] <br />NET: (1) 3-pin 3.5 mm detachable terminal block; <br />Cresnet® slave port (data only) <br />Ground: (1) 6-32 screw; <br />Chassis ground lug <br />Controls <br />Lid Open: (1) Mechanical pushbutton; <br />Disengages closed lid to actuate retraction <br />Power <br />Power Supply (included [2]): <br />Input: 1.5 Amps maximum @ 100-240 Volts AC, 50/60 Hz; <br />Output: 2.5 Amps @ 24 Volts DC; <br />Model: FT2A-UTK-PWS <br />Cresnet Power: none <br />Utility Power: Dependent upon the AC power outlet module(s) installed; <br />refer to the appropriate FT2A-PWR series spec sheet for more information <br />Environmental <br />Temperature: 32° to 112° F (0° to 45° C) <br />Humidity: 10% to 90% RH (non-condensing) <br />Construction <br />Chassis: Metal, black finish <br />Cover: Metal, black or alloy finish, mechanically retracting lid, <br />magnetically-attached bezel <br />Mounting: Flush tabletop mount, fastened by four swiveling dogs, 1-3/4 in <br />(44 mm) maximum surface thickness, 5-3/4 in (146 mm) deep x 7-1/8 in <br />(181 mm) wide cutout (template provided) <br />Power Supply: Attaches to any side of the FlipTop chassis beneath <br />the table <br />Dimensions <br />Height: 7.18 in (183 mm) with lid closed; <br /> 7.50 in (191 mm) with lid opened <br />Width: 7.81 in (199 mm) <br />Depth: 7.21 in (184 mm) <br />Dimensions shown do not include the power supply or other accessories; <br />refer to each product’s spec sheet for additional dimensions and clearances <br />Weight <br />5.5 lb (2.5 kg) without power supply or other accessories <br />Compliance <br />CE, IC, FCC Part 15 Class B digital device <br />Notes: <br />1. Backlit symbol icons are provided on the cable retractors, connector plates, and USB charging <br />modules only. Cable pass-through plates, keystone plates, and AC power outlets do not include <br />backlit symbol icons. <br />2. A single USB rapid charging module is supported using the included power supply. A second <br />power supply, model FT2A-UTK-PWS, must be purchased and installed to support a second <br />USB charging module. A maximum of one USB charging module is permitted per row. <br />3. Cable retractors are normally installed at the left and/or right end of either row. To enable <br />installation of retractors in the middle positions requires the additional purchase and installation <br />of mid-row adapter brackets (one per row, model FT2A-CBLR-BRKT-700). A mid-row retractor <br />occupies the third and fourth module slots of the row. <br />4. Only flush mount keystone connectors may be used. Connectors that stand out from the <br />mounting plate surface are not compatible.