Laserfiche WebLink
FT2A-CHGR-USBA/C <br />USB Rapid Charging Module for FT2 ELEC Series <br />crestron.com | 800.237.2041 <br /> >Adds USB rapid charging capability to an FT2 ELEC <br />Series FlipTop™ [1] <br /> >Provides one USB Type-C™ charging port and one USB Type-A <br />charging port <br /> >Supplies 32.5 Watts at up to 20 Volts for USB-C devices <br /> >Supplies 12 Watts at 5 Volts for USB-A devices <br /> >Simultaneously charges two devices (limits USB-A to 2.5 Watts) <br /> >Backlit “high-powered USB charging” symbol icon <br /> >Simple drop-in modular design <br /> >Powered via the FlipTop power bus [1] <br /> >Occupies a single module space within the FlipTop [1] <br /> >USB cables not included <br />The USB Rapid Charging Module (FT2A-CHGR-USBA/C) is a single-space <br />module designed for installation in a Crestron® FT2 ELEC Series FlipTop™. <br />It provides one USB Type-C™ charging port and one USB Type-A charging <br />port, which may be used simultaneously to quickly charge two mobile <br />phones, laptops, or tablet devices at the table. The module is labeled with <br />a backlit icon depicting the international symbol for a high-powered USB <br />charging port. <br />The USB-C™ port supports rapid charging of a single device at up to <br />32.5 Watts. Variable rate charging at up to 20 Volts enables the USB-C <br />device to negotiate the optimal voltage it requires based on its charging <br />capabilities and current battery condition. <br />The USB-A port supports charging of a single device at up to 12 Watts at <br />5 Volts. When both ports are used simultaneously, USB-A charging is <br />limited to 2.5 Watts (500 mA). <br />A maximum of two FT2A-CHGR-USBA/C modules may be installed in a <br />single FT2-700-ELEC series FlipTop. When two modules are installed, <br />each module must be positioned in a different module row and the FlipTop <br />must be equipped with a second power supply (model FT2A-UTK-PWS, <br />sold separately). <br />Note: The FT2A-CHGR-USBA/C is only compatible with FT2 ELEC series <br />“Electrical” FlipTops™. It is not compatible with FT2 MECH series <br />“Mechanical” FlipTops. The FT2A-CHGR-USBA/C is for powering and <br />charging USB devices and does not pass USB data through to any <br />other device. <br />SPECIFICATIONS <br />USB Charging <br />USB-C: Supplies 32.5 Watts at 5, 9, 15, or 20 Volts DC as demanded by <br />the device under charge <br />USB-A: Supplies 12 Watts at 5 Volts DC if USB-C port is not in use; <br /> Supplies 2.5 Watts at 5 Volts DC if USB-C port is in use <br />Connectors <br />USB-C: USB Type-C charging port, female <br />USB-A: USB Type-A charging port, female <br />Indicator <br />Symbol Icon: (1) Blue LED backlit icon with international high-powered USB <br />charging port symbol, illuminates constantly when FlipTop is powered [1] <br />Power <br />Powered via the FlipTop power bus (FT2 ELEC series only) [1] <br />Environmental <br />Temperature: 32° to 113° F (0° to 45° C) <br />Humidity: 10% to 90% RH (non-condensing)