Laserfiche WebLink
HD-MD4X1-4K-E 4x1 4K HDMI® Switcher <br />crestron.com | 800.237.2041 <br />Maximum Resolutions: <br />Scan <br />Type Resolution Frame <br />Rate <br />Color <br />Sampling <br />Color <br />Depth <br />Progressive <br />4096x2160 4K DCI <br />& <br />3840x2160 Ultra HD <br />24 Hz 4:4:4 30 bit <br />30 Hz 4:4:4 24 bit <br />30 Hz 4:2:2 36 bit <br />60 Hz 4:2:0 24 bit <br />2560x1600 WQXGA 60 Hz 4:4:4 36 bit <br />1920x1080 HD1080p 60 Hz 4:4:4 36 bit <br />Interlaced 1920x1080 HD1080i 30 Hz 4:4:4 36 bit <br />NOTE: Common resolutions are shown; other custom resolutions are <br />supported at pixel clock rates up to 300 MHz <br />Audio <br />Input Signal Types: HDMI (DisplayPort Multimode compatible [2]) <br />Output Signal Types: HDMI <br />Formats: Dolby Digital®, Dolby Digital EX, Dolby Digital Plus, <br />Dolby® TrueHD, DTS®, DTS-ES, DTS 96/24, DTS-HD High Res, <br />DTS-HD Master Audio™, LPCM up to 8 channels [6] <br />Communications <br />Ethernet: 10/100 Mbps, auto-switching, auto-negotiating, auto-discovery, <br />full/half duplex, DHCP, Web browser setup and control, Crestron control <br />system integration <br />USB: For factory use only <br />HDMI (Inputs): HDCP, EDID <br />HDMI (Output): HDCP, EDID, CEC <br />NOTE: Supports management of EDID; supports management of CEC <br />between the device connected to the HDMI output and a control system <br />Connectors <br />INPUT 1 – 4: (4) 19-pin Type A HDMI female; <br />HDMI digital video/audio inputs; <br />Also supports DVI and DisplayPort Multimode [2] <br />OUTPUT: (1) 19-pin Type A HDMI female; <br />HDMI digital video/audio output; <br />Also supports DVI [2] <br />LAN: (1) 8-wire RJ45 female; <br />10Base-T/100Base-TX Ethernet port <br />24VDC 0.75A: (1) 2.1 x 5.5 mm DC power connector; <br />24 Volt DC power input; <br />PW-2407WU power pack included <br />SERVICE: (1) USB Type A female; for factory use only <br />Display <br />Display Type: 2x20 character alphanumeric OLED <br />Functions: Displays setup and configuration menus, signal information, <br />customizable input names <br />Controls & Indicators <br />MENU: (1) pushbutton, opens the setup menu <br />p,q,t,u: (4) pushbuttons, for menu navigation and parameter adjustment <br />Enter: (1) pushbutton, applies a change <br />BACK: (1) pushbutton, steps menu back one level <br />EXIT: (1) pushbutton, exits the menu <br />PWR: (1) bicolor green/amber LED, indicates operating power supplied <br />from power pack, turns amber while booting and green when operating <br />AUTO: (1) pushbutton and green LED, selects auto-switching mode <br />INPUT 1 – 4: (4) pushbuttons for manual input selection, and (4) bicolor <br />green/amber LEDs to indicate the current active input and signal presence <br />at each corresponding input <br />LAN: (2) LEDs, amber LED indicates Ethernet activity, green LED indicates <br />Ethernet link status <br />Power Requirements <br />Power Pack: 0.75 Amps @ 24 Volts DC; <br />100-240 Volts AC, 50/60 Hz power pack, model PW-2407WU included <br />Environmental <br />Temperature: 32° to 104°F (0° to 40°C) <br />Humidity: 10% to 90% RH (non-condensing) <br />Enclosure <br />Chassis: Metal, black finish, with (2) integral mounting flanges <br />Mounting: Freestanding, surface mount, or attach to a single rack rail <br />HD-MD4X1-4K-E – Top, Front, and Bottom Views