Laserfiche WebLink
DM-PSU-ULTRA-MIDSPAN <br />DigitalMedia™ Ultra Midspan PoDM++ Injector <br />crestron.com | 800.237.2041 <br /> >Powers one or two PoDM-powered DM 8G+® devices [2] <br /> >Supports PoDM+ and PoDM++ powered devices <br /> >Simultaneously supplies up to 45 Watts from each port [1] <br /> >Inserts midspan and supplies power to both endpoints <br /> >Preserves the integrity of 4K video and 10 GB data signals <br /> >Maintains full 300 ft (100 m) cable length end-to-end <br /> >Also functions as a 2-port PoDM++ power supply for <br />DMC I/O cards <br /> >Compatible with HDBaseT® PoE+ powered devices <br /> >Includes status indicators for basic troubleshooting <br /> >No configuration or programming required <br /> >Surface or under-table mountable <br /> >Attachable to a single rack rail <br /> >1 RU rack mount kit option sold separately <br />The Crestron® DM-PSU-ULTRA-MIDSPAN provides a single-point, midspan <br />power injector for one or two PoDM-powered DM 8G+® devices. Its ability <br />to deliver power in two directions without impacting the video or data <br />signals passing through is unique in the industry. Its high-output power <br />capacity of 45 Watts per port enables support for PoDM+ and PoDM++ <br />powered devices including the Crestron TS-1542-C touch screen.[1] <br />Bidirectional Power <br />The DM-PSU-ULTRA-MIDSPAN installs in line between two DM 8G+ <br />devices and provides power to either or both of those devices. This allows <br />a DM 8G+ transmitter and receiver, such as the DM-TX-4K-302-C and <br />DM-RMC-4K-SCALER-C-DSP, to be paired together to form a custom <br />point-to-point 4K signal extender, all powered from a single midspan <br />power source. The use of a midspan power source with bidirectional <br />powering capability eliminates the need for separate power supplies or <br />electrical outlets at either endpoint.[2] <br />2-Port PoDM++ Power Supply <br />For larger systems utilizing a DM-MD8X8, DM-MD16X16, or DM-MD32X32 <br />switcher, the DM-PSU-ULTRA-MIDSPAN can be used to supply PoDM++ <br />power to two DM 8G+ devices via their connections to the switcher. <br />Instead of installing in line, each port on the DM-PSU-ULTRA-MIDSPAN <br />can be connected to the POE IN port of a DMC-4K-C input card, <br />DMC-4K-C-DSP input card, or DMC-4K-CO-HD output card. Doing so <br />enables the powering of two separate devices, whether transmitters, <br />receivers, or touch screens, through the DM port on each card. A <br />maximum of 45 Watts is available at each port.[1,2] <br />HDBaseT® Compatible <br />The DM-PSU-ULTRA-MIDSPAN is compatible with HDBaseT® Alliance <br />specifications and may be used to supply power to IEEE 802.3at compliant <br />HDBaseT PoE+ powered devices. <br />Mounting Options <br />The DM-PSU-ULTRA-MIDSPAN features integral mounting flanges to allow <br />for surface mounting under a table, or attachment to a single rack rail. One <br />or two units may also be installed in a single rack space using the optional <br />rack mount kit (model ST-RMK, sold separately). <br />SPECIFICATIONS <br />Connectors <br />G: (1) 6-32 screw; <br />Chassis ground lug <br />100-240V~ 50/60Hz 1.2-0.6A: (1) IEC 60320 C14 main power inlet; <br />Mates with removable power cord, included <br />PoDM++ 1 – 2: (2) 8-pin RJ45 female, shielded; <br />DM 8G+ pass-through ports (HDBaseT compatible); <br />PoDM++ PSE ports (HDBaseT PoE+ compatible) [2] <br />Indicators <br />PWR: (1 bottom/front, 1 top/rear) Green LEDs, each indicates main AC line <br />power is connected and the unit is operating <br />PoDM++ 1 – 2 (bottom/front): (2) Green LEDs, each indicates the <br />corresponding port is delivering power to the connected device <br />PORT PWR 1 – 2 (top/rear): (2) Green LEDs, each indicates the <br />corresponding port is delivering power to the connected device <br />Power <br />Main Power: 1.2 Amp @ 100-125 Volts AC or 0.6 Amp @ 220-240 Volts <br />AC, 50/60 Hz <br />Power Consumption: 0.7 Watts at idle