|
DM-RMC-4K-SCALER-C 4K DM 8G+® Receiver & Room Controller w/Scaler
<br />crestron.com | 800.237.2041
<br />Audio
<br />Input Signal Types: DM 8G+, HDBaseT
<br />Output Signal Type: HDMI, analog stereo [6]
<br />Digital Formats: Dolby Digital®, Dolby Digital EX, Dolby Digital Plus,
<br />Dolby® TrueHD, Dolby Atmos®, DTS®, DTS-ES, DTS 96/24, DTS-HD High
<br />Res, DTS-HD Master Audio™, LPCM up to 8 channels
<br />Analog Formats: Stereo 2-Channel [6]
<br />Digital-To-Analog Conversion: 24-bit 48 kHz
<br />Analog Performance: Frequency Response: 20 Hz to 20 kHz ±0.5 dB;
<br />S/N Ratio: >95 dB 20 Hz to 20 kHz A-weighted;
<br />THD+N: <0.005% @ 1 kHz;
<br />Stereo Separation: >90 dB
<br />Analog Volume Adjustment: -80 to 0 dB
<br />Communications
<br />Ethernet: 10/100 Mbps, auto-switching, auto-negotiating, auto-discovery,
<br />full/half duplex, DHCP
<br />RS-232: 2-way device control and monitoring up to 115.2k baud with
<br />hardware and software handshaking (via control system)
<br />IR/Serial: 1-way device control via infrared up to 1.1 MHz or serial TTL/
<br />RS-232 (0-5 Volts) up to 19.2k baud (via control system)
<br />DigitalMedia: DM 8G+, HDCP 2.2, EDID, CEC, PoDM+, Ethernet
<br />HDBaseT: HDCP 2.2, EDID, CEC, PoE+, Ethernet
<br />HDMI: HDCP 2.2, EDID, CEC
<br />NOTE: Supports management of HDCP and EDID; supports management
<br />of CEC between the connected HDMI and/or HDBaseT device(s) and a
<br />control system
<br />Connectors
<br />COM: (1) 5-pin 3.5 mm detachable terminal block;
<br />Bidirectional RS-232 port;
<br />Up to 115.2k baud, hardware and software handshaking support
<br />IR 1 – 2: (1) 4-pin 3.5 mm detachable terminal block;
<br />Comprises (2) IR/Serial ports;
<br />IR output up to 1.1 MHz;
<br />1-way serial TTL/RS-232 (0-5 Volts) up to 19200 baud
<br />AUDIO OUT L, R: (1) 5-pin 3.5 mm detachable terminal block;
<br />Balanced/unbalanced stereo line-level audio output [6];
<br />Output Impedance: 200 Ohms balanced, 100 Ohms unbalanced;
<br />Maximum Output Level: 4 Vrms balanced, 2 Vrms unbalanced
<br />RELAY 1 – 2: (1) 4-pin 3.5 mm detachable terminal block;
<br />Comprises (2) normally open, isolated relays;
<br />Rated 1 Amp, 30 Volts AC/DC;
<br />MOV arc suppression across contacts
<br />Ground: (1) 6-32 screw;
<br />Chassis ground lug
<br />LAN: (1) 8-pin RJ45 female, shielded;
<br />10Base-T/100Base-TX Ethernet port
<br />HDMI OUT: (1) 19-pin Type A HDMI female;
<br />HDMI digital video/audio output (DVI compatible [2])
<br />DM IN: (1) 8-pin RJ45 female, shielded;
<br />DM 8G+ input, HDBaseT compliant;
<br />PoDM+ PD port (HDBaseT PoE+ compatible) [3,4];
<br />Connects to the DM 8G+ output of a DM switcher, transmitter, or other
<br />DM device, or to an HDBaseT device, via CAT5e, Crestron DM-CBL-8G, or
<br />Crestron DM-CBL-ULTRA cable [1]
<br />24VDC 1.25A MAX: (1) 2.1 x 5.5 mm DC power connector;
<br />24 Volt DC power input;
<br />PW-2412WU power pack included
<br />Controls & Indicators
<br />ACT: (1) Green LED, indicates activity
<br />SETUP: (1) Red LED and (1) recessed pushbutton, for Ethernet setup
<br />RESET: (1) Recessed pushbutton, for hardware reset
<br />LAN: (2) LEDs, green LED indicates Ethernet link status, amber LED
<br />indicates Ethernet activity
<br />HDMI: (1) Green LED, indicates video signal presence at the HDMI output
<br />DM IN: (2) LEDs, green LED indicates DM link status, amber LED indicates
<br />video and HDCP signal presence
<br />24VDC: (1) Green LED, indicates operating power supplied via PoDM+,
<br />HDBaseT PoE+, or local power pack
<br />Power
<br />Power Pack (included): Input: 100-240 Volts AC, 50/60 Hz
<br /> Output: 1.25 Amps @ 24 Volts DC
<br /> Model: PW-2412WU
<br />Power over DM (PoDM): IEEE 802.3at Type 2 Class 4 (25.5 W) compliant
<br />PoDM+ PD (Powered Device), capable of being powered by a PoDM+ PSE
<br />(Power Sourcing Equipment) [3]
<br />Power over HDBaseT: IEEE 802.3at Type 2 Class 4 (25.5 W) compliant
<br />HDBaseT PoE+ PD (Powered Device), capable of being powered by an
<br />HDBaseT PoE+ PSE (Power Sourcing Equipment) [4]
<br />Power Consumption: 18 Watts
<br />Environmental
<br />Temperature: 32° to 104° F (0° to 40° C)
<br />Humidity: 10% to 90% RH (non-condensing)
<br />Heat Dissipation: 63 BTU/hr
<br />Enclosure
<br />Chassis: Metal, black finish, with (2) integral mounting flanges, vented
<br />top, front, and bottom
<br />Mounting: Freestanding, surface mount, or attach to a single rack rail
<br />Dimensions
<br />Height: 12.51 in (318 mm)
<br />Width: 5.37 in (137 mm)
<br />Depth: 1.08 in (28 mm)
|