Laserfiche WebLink
Gateway Park Center PERKINS+WILL <br /> 810495.000 <br /> 12/06/18 <br /> <br /> <br />DOOR HARDWARE <br />08 71 00 - 15 <br /> <br /> <br />jurisdiction, for smoke control ratings indicated, based on testing according to <br />UL 1784. <br />1. Provide smoke labeled perimeter gasketing at all smoke labeled openings. <br />C. Fire Labeled Gasketing: Assemblies complying with NFPA 80 that are listed and <br />labeled by a testing and inspecting agency acceptable to authorities having <br />jurisdiction, for fire ratings indicated, based on testing according to UL-10C. <br />1. Provide intumescent seals as indicated to meet UL10C Standard for Positive <br />Pressure Fire Tests of Door Assemblies, and NPFA 252, Standard Methods of Fire <br />Tests of Door Assemblies. <br />D. Sound-Rated Gasketing: Assemblies that are listed and labeled by a testing and <br />inspecting agency, for sound ratings indicated. <br />E. Replaceable Seal Strips: Provide only those units where resilient or flexible seal strips <br />are easily replaceable and readily available from stocks maintained by manufacturer. <br />F. Manufacturers: <br />1. Pemko Products; ASSA ABLOY Architectural Door Accessories (PE). <br />2. Reese Enterprises, Inc. (RE). <br />2.15 ELECTRONIC ACCESSORIES <br />A. Switching Power Supplies: Provide UL listed or recognized filtered and regulated <br />power supplies. Provide single, dual, or multi-voltage units as shown in the hardware <br />sets. Units must be expandable up to sixteen Class 2 power limited outputs and have <br />thermal shutdown protection with auto-restart. Units must include the capability to <br />incorporate a battery backup option with integral battery charging capability in <br />addition to operating the DC load in event of line voltage failure. Provide the least <br />number of units, at the appropriate amperage level, sufficient to exceed the required <br />total draw for the specified electrified hardware and access control equipment. <br />1. Manufacturers: <br />a. Securitron (SU) - AQ Series. <br />2.16 FABRICATION <br />A. Fasteners: Provide door hardware manufactured to comply with published templates <br />generally prepared for machine, wood, and sheet metal screws. Provide screws <br />according to manufacturers recognized installation standards for application intended. <br />2.17 FINISHES <br />A. Standard: Designations used in the Hardware Sets and elsewhere indicate hardware <br />finishes complying with ANSI/BHMA A156.18, including coordination with traditional <br />U.S. finishes indicated by certain manufacturers for their products.