Laserfiche WebLink
Gateway Park Center PERKINS+WILL <br /> 810495.000 <br /> 12/06/18 <br /> <br /> <br />GLAZING <br />08 80 00 - 9 <br /> <br /> <br />2.7 MISCELLANEOUS GLAZING MATERIALS <br />A. General: Provide products of material, size, and shape complying with referenced <br />glazing standard, requirements of manufacturers of glass and other glazing <br />materials for application indicated, and with a proven record of compatibility with <br />surfaces contacted in installation. <br />B. Cleaners, Primers, and Sealers: Types recommended by sealant or gasket <br />manufacturer. <br />C. Setting Blocks: Elastomeric material with a Shore, Type A durometer hardness of <br />85, plus or minus 5. <br />D. Spacers: Elastomeric blocks or continuous extrusions with a Shore, Type A <br />durometer hardness required by glass manufacturer to maintain glass lites in place <br />for installation indicated. <br />E. Edge Blocks: Elastomeric material of hardness needed to limit glass lateral <br />movement (side walking). <br />F. Cylindrical Glazing Sealant Backing: ASTM C 1330, Type O (open-cell material), of <br />size and density to control glazing sealant depth and otherwise produce optimum <br />glazing sealant performance. <br />2.8 FABRICATION OF GLAZING UNITS <br />A. Fabricate glazing units in sizes required to glaze openings indicated for Project, with <br />edge and face clearances, edge and surface conditions, and bite complying with <br />written instructions of product manufacturer and referenced glazing publications, to <br />comply with system performance requirements. <br />B. Clean-cut or flat-grind vertical edges of butt-glazed monolithic lites in a manner <br />that produces square edges with slight kerfs at junctions with outdoor and indoor <br />faces. <br />C. Grind smooth and polish exposed glass edges and corners. <br /> <br />PART 3 - EXECUTION <br />3.1 EXAMINATION <br />A. Examine framing glazing, with Installer present, for compliance with the following: <br />1. Manufacturing and installation tolerances, including those for size, <br />squareness, and offsets at corners. <br />2. Presence and functioning of weep system. <br />3. Minimum required face or edge clearances. <br />4. Effective sealing between joints of glass-framing members.