Laserfiche WebLink
Gateway Park Center PERKINS+WILL <br /> 810495.000 <br /> 12/06/18 <br /> <br /> <br />CERAMIC TILING <br /> 09 30 13 - 3 <br /> <br /> <br />1. Basis-of-Design Product: Subject to compliance with requirements, provide <br />products indicated on Drawings. <br />2. Certification: Tile certified by the Porcelain Tile Certification Agency. <br />3. Face Size: As shown. <br />4. Face Size Variation: Rectified. <br />5. Thickness: As shown. <br />6. Face: Plain with square edges. <br />7. Tile Color, Glaze, and Pattern: As indicated. <br />8. Grout Color: As indicated. <br />D. Ceramic Tile Type: PT-4, porcelain tile. <br />1. Basis-of-Design Product: Subject to compliance with requirements, provide <br />products indicated on Drawings. <br />2. Certification: Tile certified by the Porcelain Tile Certification Agency. <br />3. Face Size: As shown. <br />4. Face Size Variation: Rectified. <br />5. Thickness: As shown. <br />6. Face: Plain with square edges. <br />7. Tile Color, Glaze, and Pattern: As indicated. <br />8. Grout Color: As indicated. <br />E. Ceramic Tile Type: PT-5, porcelain tile. <br />1. Basis-of-Design Product: Subject to compliance with requirements, provide <br />products indicated on Drawings. <br />2. Certification: Tile certified by the Porcelain Tile Certification Agency. <br />3. Face Size: As shown. <br />4. Face Size Variation: Rectified. <br />5. Thickness: As shown. <br />6. Face: Plain with square edges. <br />7. Tile Color, Glaze, and Pattern: As indicated. <br />8. Grout Color: As indicated. <br />F. Pebble Tile Type: PP-1, pebble tiles. <br />1. Basis-of-Design Product: Subject to compliance with requirements, provide <br />Island Stone; Perfect Pebble. <br />2. Face Size: As shown. <br />3. Thickness: As shown. <br />4. Tile Color, Glaze, and Pattern: As indicated. <br />5. Grout Color: As indicated. <br />2.3 THRESHOLDS <br />A. General: Fabricate to sizes and profiles indicated or required to provide transition <br />between adjacent floor finishes. <br />1. Bevel edges at 1:2 slope, with lower edge of bevel aligned with or up to 1/16 <br />inch above adjacent floor surface. Finish bevel to match top surface of <br />threshold. Limit height of threshold to 1/2 inch or less above adjacent floor <br />surface.