Laserfiche WebLink
Gateway Park Center PERKINS+WILL <br /> 810495.000 <br /> 12/06/18 <br /> <br /> <br />INTERIOR PAINTING <br /> 09 91 23 - 2 <br /> <br /> <br />4. Label each Sample for location and application area. <br />C. Product List: Cross-reference to paint system and locations of application areas. <br />Use same designations indicated on Drawings and in schedules. Include color <br />designations. <br />1.4 MAINTENANCE MATERIAL SUBMITTALS <br />A. Furnish extra material, from the same product run, that match products installed <br />and that are packaged with protective covering for storage and identified with <br />labels describing contents. <br />1. Paint: 5 percent, but not less than 1 gal. of each material and color applied. <br />1.5 QUALITY ASSURANCE <br />A. Mockups: Apply mockups of each paint system indicated and each color and finish <br />selected to verify preliminary selections made under Sample submittals and to <br />demonstrate aesthetic effects and set quality standards for materials and <br />execution. <br />1. Architect will select one surface to represent surfaces and conditions for <br />application of each paint system. <br />a. Vertical and Horizontal Surfaces: Provide samples of at least 100 sq. ft. <br />b. Other Items: Architect will designate items or areas required. <br />2. Final approval of color selections will be based on mockups. <br />a. If preliminary color selections are not approved, apply additional <br />mockups of additional colors selected by Architect at no added cost to <br />Owner. <br />3. Approval of mockups does not constitute approval of deviations from the <br />Contract Documents contained in mockups unless Architect specifically <br />approves such deviations in writing. <br />4. Subject to compliance with requirements, approved mockups may become <br />part of the completed Work if undisturbed at time of Substantial Completion. <br />1.6 DELIVERY, STORAGE, AND HANDLING <br />A. Store materials not in use in tightly covered containers in well -ventilated areas with <br />ambient temperatures continuously maintained at not less than 45 deg F. <br />1. Maintain containers in clean condition, free of foreign materials and residue. <br />2. Remove rags and waste from storage areas daily.