Laserfiche WebLink
Gateway Park Center PERKINS+WILL <br /> 810495.000 <br /> 12/06/18 <br /> <br /> <br />SOLID-SURFACE TOILET COMPARTMENTS <br /> 10 21 13.19 - 2 <br /> <br /> <br />1.4 MAINTENANCE MATERIAL SUBMITTALS <br />A. Furnish extra materials that match products installed and that are packaged with <br />protective covering for storage and identified with labels describing contents and <br />source. <br />1. Door Hinges: One hinge with associated fasteners. <br />2. Latch and Keeper: One latch and keeper with associated fasteners. <br />3. Door Bumper: One bumper with associated fasteners. <br />4. Door Pull: One door pull with associated fasteners. <br />5. Fasteners: Ten fasteners of each size and type. <br />1.5 PROJECT CONDITIONS <br />A. Field Measurements: Verify actual locations of toilet fixtures, walls, columns, <br />ceilings, and other construction contiguous with toilet compartments by field <br />measurements before fabrication. <br />PART 2 - PRODUCTS <br />2.1 PERFORMANCE REQUIREMENTS <br />A. Surface-Burning Characteristics: Comply with ASTM E 84; testing by a qualified <br />testing agency. Identify products with appropriate markings of applicable testing <br />agency. <br />1. Flame-Spread Index: 25 or less. <br />2. Smoke-Developed Index: 450 or less. <br />B. Regulatory Requirements: Comply with applicable provisions in the U.S. <br />Architectural & Transportation Barriers Compliance Board's ADA-ABA Accessibility <br />Guidelines for Buildings and Facilities and ICC A117.1 for toilet compartments <br />designated as accessible. <br />2.2 PF-02, SOLID-SURFACE TOILET COMPARTMENTS <br />A. Basis-of-Design Product: Subject to compliance with requirements, provide Privacy <br />Plus Partitions; Privacy Plus Partitions with DuPont Corian solid surface panels. <br />B. Toilet-Enclosure Style: Ceiling hung. <br />C. Panel Material: Homogeneous filled acrylic; not coated, laminated or of composite <br />construction; meeting ANSI Z124.3 and 6, Type Six and Fed. Spec. WW -P- <br />541E/Gen. <br />1. Material shall be 1/2” thick solid surface.