Laserfiche WebLink
Gateway Park Center PERKINS+WILL <br /> 810495.000 <br /> 12/06/18 <br /> <br /> <br />QUALITY REQUIREMENTS <br />01 40 00 - 1 <br /> <br /> <br />SECTION 01 40 00 - QUALITY REQUIREMENTS <br />PART 1 - GENERAL <br />1.1 SUMMARY <br />A. Section includes administrative and procedural requirements for quality assurance <br />and quality control. <br />B. Testing and inspection services are required to verify compliance with requirements <br />specified or indicated. These services do not relieve Contractor of responsibility for <br />compliance with the Contract Document requirements. <br />1. Specified tests, inspections, and related actions do not limit Contractor's other <br />quality-assurance and quality-control procedures that facilitate compliance <br />with the Contract Document requirements. <br />2. Requirements for Contractor to provide quality-assurance and quality-control <br />services required by Architect, Owner or authorities having jurisdiction are not <br />limited by provisions of this Section. <br />1.2 DEFINITIONS <br />A. Experienced: When used with an entity or individual, "experienced" unless <br />otherwise further described means having successfully completed a minimum of <br />five previous projects similar in nature, size, and extent to this Project; being <br />familiar with special requirements indicated; and having complied with <br />requirements of authorities having jurisdiction. <br />B. Field Quality-Control Tests: Tests and inspections that are performed on-site for <br />installation of the Work and for compl eted Work. <br />C. Installer/Applicator/Erector: Contractor or another entity engaged by Contractor as <br />an employee, Subcontractor, or Sub-subcontractor, to perform a particular <br />construction operation, including installation, erection, application, assembly, and <br />similar operations. <br />1. Use of trade-specific terminology in referring to a trade or entity does not <br />require that certain construction activities be performed by accredited or <br />unionized individuals, or that requirements specified apply exclusively to <br />specific trade(s). <br />D. Mockups: Full-size physical assemblies that are constructed on-site either as <br />freestanding temporary built elements or as part of permanent construction. <br />Mockups are constructed to verify selections made under Sample submittals; to <br />demonstrate aesthetic effects and qualities of materials and execution; to review <br />coordination, testing, or operation; to show interface betw een dissimilar materials; <br />and to demonstrate compliance with specified installation tolerances. Mockups are <br />not Samples. Unless otherwise indicated, approved mockups establish the standard <br />by which the Work will be judged.