Laserfiche WebLink
• Clean printer with pre- soaked cleaning pad <br />• Lubricate hinges and locks if Payment Station is located near salt water <br />• Clear printer of paper dust <br />• Clean credit card reader <br />• Clean bill validator <br />• Clean sensors and coin tracks <br />• Clean Solar panel, and check connections <br />• Inspect coin bag for wear <br />• Blow out bill stacker with compressed air <br />• Wipe coin acceptor pathway with wipes <br />• Perform EMS connectivity tests <br />• Filed test all components <br />Every Three Months - To be performed by Distributor <br />• Lubricate hinges and locks <br />• Lubricate coin acceptor return bar <br />• Clean and wax cabinet exterior <br />Every Six Months - To be performed by Distributor <br />• Change access passwords (or with staff change) <br />• Confirm programming is correct and assist with necessary changes <br />• Check cable tie paths <br />• Check alarm module <br />• Check for loosened nuts <br />• Inspect wear on plastic parts <br />