Laserfiche WebLink
Draft Scope of Services <br />Citywide Coastal Monitoring Program <br />S <br />a City of Sunny Isles, Miami-Dade County,Florida <br />1L <br />1 <br />Septem , <br />SDI <br />Pber. <br />N.2916- <br />24222016 <br />I)IVI:!'SII:If i) Page 3 of4 <br />monument is located more than 300 feet landward of the vegetation line, data points shall be <br />extended to one hundred (100) foot intervals from two hundred (200) feet landward of the <br />approximate vegetation line to the monument location. The reference monument shall be recorded as <br />range 0.0 along the profile with positive ranges extending seaward of the monument and negative <br />ranges extending landward of the monument. <br />Offshore Profile Data Collection-Bathometric <br />Bathymetric profile data at R-monuments and intermediate points, as applicable, shall be collected <br />as close to high tide as practical and shall extend landward to a depth that overlaps the onshore <br />portion of the survey. Bathymetric profile data collection at R-monuments shall extend offshore a <br />minimum distance of 3000 feet from the shoreline or to -30 feet (NAVD), whichever point is reached <br />first. Bathymetric profile data collection at intermediate profile points shall extend offshore a <br />minimum distance of 1000 feet from the approximate shoreline. Bathymetric data collection shall <br />occur as close to the time of the onshore topographic survey as practical with the objective to not <br />exceed seven (7) days of time difference between the two (2) survey events. Maximum wave height <br />during the course of bathymetric data collection shall be three(3) feet. <br />Bathymetric data shall be collected using an automated hydrographic system comprised of a survey <br />launch equipped with an Odom marine grade sounder with integrated motion sensor, Differential <br />Global Positioning System (DGPS) and computer-based navigation / data collection system. The <br />motion sensor will be employed to reduce the effects of vessel heave, pitch and roll during the course <br />of data collection. The sounder shall be calibrated via bar checks prior to the start of the survey. <br />Prior to the start of the survey a tide staff or gauge will be established in proximity to the project for <br />recording water levels during the course of the data collection activities. The tide staff or gauge will <br />be set relative to published control in the vicinity of the project. <br />Digital Ground Photography <br />During the course of field data collection, digital photographs shall be taken at approximate mid- <br />beach along each profile line. Three (3) photographs shall be captured, one each shore-parallel north <br />and south of the profile and one towards the monument location. An additional photograph of the <br />monument or TBM shall be taken with sufficient clarity to read the monument stamping. Digital <br />images shall be provided to the City of Sunny Isles Beach and BBCS on CD or DVD media in .jpg <br />format at a minimum 640 x 480 resolution. <br />Data Processing and Final Deliverables <br />Upon completion of field survey activities, data will be edited and reduced to the project datum and <br />translated to an x,y,z, ASCII format for submittal to the City and BBCS. In addition, and in <br />accordance with the Specifications, the following deliverables will be provided: <br />1. Survey report/ monument control report certified by a Professional Surveyor and Mapper. <br />2. Copies of field books and data collection files, as applicable. (hardcopy and PDF'format) <br />3. Description of all monuments and TBM's used for the survey, including identification, <br />stamping, coordinates, elevations and profile azimuths. Control description shall be <br />provided in both hardcopy and digital formats (ASCII and Excel) <br />4. Final profile data in ASCII x,y,z format and FDEP distance / depth format with associated <br />header records <br />5. ASCII raw data file <br />6. Digital photographs in .jpg format with appropriate labeling <br />7. Plan / profile charts in AutoCAD .dwg format <br />8. Plan / profile charts in hardcopy format(24"x 36°) <br />9. Metadata files <br />10. Survey Report <br />Surveying • Engineering • Applications