Sagaris Corp. - Laserfiche WebLink

Home Browse Search

RN20-30 Urban Luminaire Specifications: Renaissance LED (large) Hood Injection die cast A360.1 aluminum dome, mechanically assembled on [he luminaire housing. Housing In a round shape, this housing is made of injec- tion die cast A360.1 aluminum, complete wfth a weatherproof door giving a tool free access to the ballast, without disconnection of wiring, mechanically assembfed.7his suspension system permits a full rotation of the luminaire in 90"increments. Access -mechanism Optical system LE2F/R/5 (type II asymmetrical),.LE3F/R/5 (type III asymmetrical), LE4F/R/S (type IV asymmetrical), LE5F/R/S (type V symmet- rical) light distributions (F=flat lens, R=globe, 5 -sag lens). Composed of high performance optical grade PMMA acrybc refractor lenses to achieve desired distribution optimized to get maximum spacing, target Wmens and a supe- riorlighting uniformity. Optical system is rated IP66. Performance shall be tested per LM 63, LM 79 and TM 15 (IESNA) certifying its photo- metricperformance. Street side indicated. For Flat Lens only: Dark Sky compliant with 0% uptight and UO per IESNA TM 15. Injection die cast A360.1 aluminum frame with latch and hinge, complete with cast in Prismatic security block for frame's open position. The globe: mechanism shall offer tool free access to the inside of the luminaire. An embedded memory retentive gasket shall ensure weatherproofing. Light engine LEDgine composed of 5 main components: Globe /Heat Sink /LED module / Optical System/ Driver Electrical components are RoHS compliant. Globe LExR: Made of one-piece seamless injec- tion -molded (ACDR) DR acrylic or (GL) dear Borosilicate glass globe having an inner prismatic surface. Complete with asemi-pris- matichouse side shield and external glare softening prisms. The globe is mechan(cally ssembled and sealed onto the lower part of the heat sink. LExF/LE%S: Made of soda lime tempered glass lens, mechanically assembled and sealed onto the (ower part of the heat sink. Heat sink Made of cast aluminum optimizing the LEDs efficiency and life. Product does not use any cooling device with moving parts (only pas- sive cooling device). LED engine LED type: Lumileds LUXEON T Composed ofhigh-performance white LEDs. Color tem- perature as per AN51/NEMA bin Neutral White, 4000 Kelvin nominal (3985K +/- 275K or 3710K to 4260K) or Warm white, 3000 Kelvin nominal (3045K +/-175K or 2870K to 3220K), CRI 70 Min. 75 Typical. RN20-30-Lerge-Renaissance-LED 04/20 page 6 of 8 IP66 rated optical system, com- posed ofindividual pre -oriented lens to achieve desired distri- bution, assembled with globe having an inner prismatic surface permanently sealed onto [he lower part of the heat sink. LE2R-Type II (ASVM) with globe LE3R-Type III (ASYM) with globe LE4R-Type IV (ASYM) with globe LESR-Type V (SYMM) with gl¢be Sag lens; IP66 rated optical system, com- posed of Individual pre -oriented fens to achieve desired dishibu- tion, assembled with atem- pered-glass sag lens permanent- lysealed onto the lower part of the heat sink. LE25-Type II (ASYM) Sag glass lens LE35-Type III (ASYM) Sag glass tens LE45-Type IV (ASYM) Sag glass fens LE55-Type V (SYMM) Sag glass fens Flat tens: IP66 rated optical system, com- posed of individual pre -oriented lens to achieve desired distribu- tion,assembled with a tem- pered -glass flat lens permanently sealed onto the (ower part of the heat sink. LE2F-Type II (ASPM) Rat glass lens LE3F-Type III (ASYM) Flat glass Lens LE4F-Type IV (ASVM) Flat glass lens LE5F-Type V (SYMM) Flat glass lens Driver Driver comes standard with dimming compatible O -10V. High powerfactor of 95%. Electronic driver, operating range 50/60 Hz. Auto adjusting universal voltage input from 120 to 277 VAC rated far both application line to line or line to neutral, Class I, THD of 20%max. Maximum ambient operating temperature from -40F (-40C) to 130E (SSC) degrees. Certified in compliance to UL1310 cULus requirement. Dry and damp Location. Assembled on a unitized removable tray with Tyco quick disconnect plug resisting to 221F(105C) degrees. The current supplying the LEDs will be reduced by the driver if the driver experiences internal overheating as a protection to the LEDs and the electrical components. Output is protected from short circuits, voltage overload and current overload. Automatic recovery after correction. Standard built in driver surge protection of 2.SkV (min). Surge protector Surge protector tested inaccordance with AN51/IEEE C62.45 per AN51/IEEE C62.41.2 Scenario I Category C High Exposure IOkV/ IOkA waveforms for Line Ground, Line Neutral and Neutral Ground, and in accordance with U.S. DOE (Department of Energy) MSSLC (Municipal Solid State Street Lighting Con- sortium) modclspecification for LED roadway luminaires electrical immunity requirements for High Test Level 10kV / 10kA. Option for SP2 20kV/20kA.