Reso 2020-3136 - Laserfiche WebLink

Home Browse Search

SOURCEWWELI, Book 2 — IQCC Standard Terms. and Conditions and Contract General Conditions a Reimbursable Task to be paid a mark-up of 10% on the fees paid to a governmental entity to obtain filings and permits. Contractor shall submit written documentation of such fees, The 10% mark-up shall cover all costs over and above the filing and permit fees, including expeditor fees. 8.2 The Contractor shall comply with and give notices required by laws, ordinances, rules, regulations and lawful orders of public authorities applicable to performance of the Work. 8.3 It is not the Contractor's responsibility to ascertain that the Detailed Scope of Work is in accordance with applicable laws, statutes, ordinances, building codes, and rules and regulations. However, if the Contractor observes that any portion of the Detailed Scope of Work is at variance therewith, the Contractor shall promptly notify the Project Manager in writing. 9. PERSONNEL The Contractor shall employ competent personnel for the development of the Project's Detailed Scope of Work, the preparation of the Price Proposal and the execution of the Work. During the performance of the Work, the superintendent assigned to the Project shall represent the Contractor, and communications given to the superintendent shall be as binding as if given to the Contractor. Important communications shall be confirmed in writing. Other communications shall be similarly confirmed on written request in each case. 10. SHOP DRAWINGS, PRODUCT DATA AND SAMPLES 10.1 Shop Drawings, Product Data, Samples and similar submittals are not Contract Documents, The purpose of their submittal is to demonstrate for those portions of the Detailed Scope of Work for which submittals are required by the Contract Documents the way by which the Contractor proposes to conform to the information given and the design concept expressed in the Detailed Scope of Work. Submittals which are not required by the Contract Documents may be returned by the Project Manager without action. 10.E The Contractor shall reviewfor compliance with the Contract Documents, approve and submit to the Project Manager Shop Drawings, Product Data, Samples and similar submittals required with reasonable promptness and in such sequence as to cause no delay in the Work or in the activities of the Sourcewell Member or of separate contractors. Submittals which are not marked as reviewed for compliance with the Contract Documents and approved by the Contractor may be returned by the Project Manager without action, 10,E By approving and submitting Shop Drawings, Product Data, Samples and similar submittals, the Contractor represents that the Contractor has determined and verified materials, field measurements and field construction criteria related thereto, or will do so, and has checked and coordinated the information contained within such submittals with the requirements of the Detailed Scope of Work and of the Contract Documents. 10.4 The Contractor shall perform no portion of the Work for which the Contract Documents require submittal and review of Shop Drawings, Product Data, Samples or similar submittals until the respective submittal has been approved by the Project Manager. 10.5 The Work shall be performed in accordance with approved submittals except that the Contractor shall not be relieved of responsibility for deviations from requirements of the Contract Documents by the Project Manager's approval of Shop Drawings, Product Data, Samples or similar submittals unless the Contractor has specifically informed the Project 17 Section Iwo — Contract Gnnerai Conditions h larch 2019