Reso 2022-3321 - Laserfiche WebLink

Home Browse Search

CAL SHARK STATEMENT OF WARRANTY Metal Shark provides a total end-to-end warranty for the vessel, including any components manufactured by Metal Shark and the installation workmanship of any Metal Shark -installed OEM components. Defects of the OEM components are warranted by the individual OEMs and managed on a "pass-through" basis by Metal Shark, subject to the OEMs' stated warranty terms, conditions and exclusions. Please refer to individual OEM statements of warranty for details. Metal Shark will repair or replace any affected item and will bear the cost of such remedy entirely. Metal Shark reserves the right to direct the vessel to a local repair facility of their choosing, request the vessel be returned to Metal Shark's manufacturing facility or direct subcontracted personnel to affect repairs. It will be the responsibility of the customer to make the vessel and/or its component problem available at an agreed location or to personnel designated by Metal Shark to remedy the warranty issue. Warranty does not cover normal wear and tear or cosmetic damage; failures due to neglect, improper operation or insufficient maintenance are also excluded. Misuse or abuse of systems or alteration of or modifications made to systems, hull, or components without prior authorization shall not be covered. Structural warranty encompasses the structural integrity of hull, deck and console structures that are aluminum. warranty covers workmanship of fabricated elements. Ten (10) Years from acceptance of vessel by the customer Structural repair or replacement shall be done at the discretion of the Builder. It will be the responsibility of the Owner to bring the vessel at his expense to Metal Shark or an agreed-upon facility capable of remedying the warranty issue. No warranty work will be performed without an agreed cost approved by the Builder. Staining, corrosion or marring of the surface of the aluminum are not warranted. Deterioration or failure due to abuse, neglect or stress beyond the intended design parameters of the vessel are also not covered. Individual components of the vessel, purchased by the Builder and installed on the vessel, are warranted by the Original Equipment Manufacturers (OEMs) that provide such components (i.e.: engine by engine manufacturer, etc.). For the term of the Complete Boat Warranty, warranty claims for such components are managed by Metal Shark with the OEM(s) on behalf of the customer. Thereafter, the customer shall work directly with the OEM to file and resolve any warranty claims. After the Complete Boat Warranty expires, Metal Shark will not be responsible for remedying any component failures unless such failure is determined to involve faulty original installation or the installation contributed to the failure in any other way. In such cases, it will be the responsibility of the Owner to make the vessel and/or its component problem available at an agreed location to remedy the warranty issue. Varies by OEM, see individual OEM Statements of Warranty for details. Metal Shark will not warranty the installation of any component if the failure was caused by misuse or abuse of systems or alteration of or modifications made to systems, hull, or components without prior authorization. Neglect, improper operation or insufficient maintenance are excluded as are normal wear and tear or cosmetic damage. 188