Laserfiche WebLink
<br />Carpet and Floor Maintenance Services | Bid No. 24-01-01 33 <br /> <br />CITY OF SUNNY ISLES BEACH <br />18070 Collins Ave. | Sunny Isles Beach, FL 33160 <br />305.792.1707 | sibfl.net | Purchasing@sibfl.net <br />Removability: <br />1. The product shall be completely removed using a nylon abrasive pad and a good floor finish <br />remover. <br /> <br />2. The product shall have a Specific Gravity of Min. 1.025 to Max. 1.035 When measured by a <br />Westphalt Gravity Balance at 25°C. <br /> <br />3. The product shall contain no copper or magnesium except for trace amounts found in the water. <br /> <br />4. The product shall have a clean-smelling, ammonia type odor with no objectionable odors. <br /> <br />5. Flash Point: The product shall exhibit no measurable Flash Point when the Cleveland Closed Cup <br />or Tagliabue Cup Flash Point Test Apparatus is employed. <br /> <br />6. The product shall have Viscosity of Min. 3 to Max 5 Centipoises, when measured by the <br />Brookfield Viscosity Meter at 25°C. <br /> <br />7. The product shall be free from non-aqueous solvents, such as hydrocarbons, ketones, esters, <br />pine oil, alcohol, etc. <br /> <br />4.4 METAL - LINK POLYMER FLOOR FINISH <br /> <br />Scope <br />• This specification covers a self-polishing, slip resistant, all synthetic water emulsion floor finish <br />intended for use on, and not detrimental to, sealed or finished wood surfaces, asphalt tile, <br />linoleum, rubber, vinyl composition, painted concrete, terrazzo and cement surfaces. The <br />product is to be used without dilution. Acid sensitive emulsions are excluded. <br /> <br />Requirements <br />1. The finish shall consist of all synthetic components. It shall contain no natural waxes. <br /> <br />2. The finish shall contain a minimum of 15 non-volatile materials when determined in <br />accordance with ASTM method D-1289-64. <br /> <br />3. The finish shall consist of polyacrylic and polyethylene components. Polymers shall be <br />metal-linked to provide excellent detergent resistance. <br /> <br />4. The product shall be safe for use on all kinds of floors including asphalt, vinyl, linoleum, <br />terrazzo, marble, sealed wood, cork, rubber, and other composition tile surfaces. <br /> <br />5. The product shall produce a colorless, non-slip, water resistant coating having a very <br />high gloss. <br /> <br />6. The finish shall be re-applied within 30 minutes after prior coat has dried. Second coat