Laserfiche WebLink
Refinishing shall be defined as the proper application of at least two coats of finish to all areas. <br />In addition, terrazzo floors must be treated with proper crystallization seal process every 6 <br />months (part of Deep Cleaning Service). The finish should be applied with a clean, fine strand, <br />rayon mop head. No finish, which has been removed from its original container, should be <br />returned to that container. <br /> <br />3.5.2 CARPET CLEANING, WATER EXTRACTION METHOD <br />Carpet cleaning, water extraction method shall be defined as the spot cleaning and vacuuming <br />operation of the water extraction equipment, and re-vacuuming of all carpet in an area. <br /> <br />All vacuuming, both before and after the use of the water extraction equipment shall be done <br />with a medium-duty pile lifter vacuum. <br /> <br />All stained areas shall be treated with spot cleaning solutions, following the directions of the <br />manufacturer of the solutions. Spot cleaning should continue until as much of the stain as possible <br />has been removed. <br /> <br />The water extraction equipment and materials shall meet the specifications given in this <br />document. The water extraction equipment shall be operated over the entire carpeted area. <br /> <br />All instructions provided by the manufacturer of the water extraction equipment and materials <br />shall be followed during their use. <br /> <br />After operating the water extraction equipment and allowing sufficient drying time, the carpet <br />shall be vacuumed following a pattern that will give the carpet pile a uniform appearance. <br /> <br />3.5.3 CARPET CLEANING, DRY FOAM METHOD <br />Dry foam shampooing of carpets shall be defined as the spot cleaning, vacuuming, shampooing, <br />and re-vacuuming of all carpets in an area. All vacuuming, both before and after shampooing, <br />shall be done with a medium-duty pile lifter vacuum. <br /> <br />All stained areas shall be treated with a spot cleaning solution, following the directions of the <br />manufacturer. Spot cleaning should be continued until as much of the stain as possible has been <br />removed. <br /> <br />The shampooing shall be done using equipment and materials specifically designed for dry foam <br />shampooing and meeting the specifications for such equipment and materials given in this <br />document. The instructions provided by the manufacturers of the equipment and materials <br />should be followed during its use. <br /> <br />Areas, such as corners, which are inaccessible to the machine, shall be shampooed with foam <br />from the machine and manual scrubbing devices. <br /> <br />After shampooing and allowing sufficient drying time, the carpet shall be vacuumed following a <br />pattern that will give the pile a uniform appearance. <br /> <br />