Green Facility ITB 24-01-01 - Laserfiche WebLink

Home Browse Search

12. Free rinsing - excellent. 13. Foaming – Moderate foam with excellent stability, in the presence of grease and oil. 14. The undiluted concentrate shall have a viscosity of not less than 450 cps or more than 850 cps at room temperature (20°C). 15. The product may be diluted as much as one ounce per gallon (1:128) for application to cars and trucks; as much as one to eighty for cleaning windows, mirrors and glassware; and as much as one to fifty for cleaning walls, woodwork, and all types of floors. 16. The product shall be safe for use on all surfaces when used as directed. 4.3 WATER EMULSION TYPE CONCRETE AND TERRAZZO SEALER Scope Water emulsion type concrete and terrazzo sealer covered by this specification is a water emulsion of polymers for use as a pre-coat on resilient floors, both porous and non-porous, and on non-resilient floors such as concrete and terrazzo. Requirements 1. Non-Volatile Total Solids: Shall not be less than 15.6%. 2. Stability: The product shall show no separation, gelling, creaming, or otherwise deteriorate in the container for a period of at least a year. 3. Alkalinity: The product shall have a pH of 9.1 measured on a Beckman pH Balance at 25°C. 4. Gloss: The product shall have a gloss of 87 when applied to a black glass plate having a gloss of 95. 5. Drying Time: The product shall dry to a clear, glossy finish within 30 minutes. 6. Slip Resistance: Meets or exceeds the CSMA Bench Mark Standard for slip resistance as determined by ASTM D-2047-69-A, a comparable standard to that used by Underwriters Laboratory. 7. Tackiness: A dry film of the product shall not be tacky when tested 4 hours after application. 8. Deleterious Effect on Floor: The product, when applied to resilient or non-resilient floors, shall not show effects such as whitening, discoloration or in any way be injurious to the floor surface. 9. Water resistance: Shall not be affected by 24 hours of contact with water.