Laserfiche WebLink
shall not whiten or lift the first coat – it shall produce enhanced gloss. <br />7. The product shall resist scuffing, powdering, and scratching under traffic to a <br />satisfactory degree and shall respond to buffing. <br /> <br />8. The finish shall level well without streaking or puddling when applied with mop or lambs <br />wool applicator or when tested according to ASTM method D-1436-56. <br /> <br />9. The finish shall resist wet cleaning with alkaline detergents without being removed from <br />the floor and without destroying gloss. However, it shall be readily removable by <br />industrial and institutional wax strippers. Removability properties may be tested in <br />accordance with ASTM method D-1792-66. <br /> <br />10. The product shall not be acid sensitive, and shall resist acidic cleaners and strippers, <br />including acidic soft drinks and fruit juices. <br /> <br />11. The finish shall be non-yellowing on the floor and shall be milk white in the original <br />container, rather than tan. <br /> <br />12. The finish shall have a coefficient of static friction on the floor greater than 0.50 when <br />measured by the ASTM method D-2047-69, and accordingly, is considered safe. <br /> <br />13. The finish shall be film-forming at usual temperatures and shall produce no powdering <br />and no hazing. <br /> <br />14. The finish shall be completely waterproof within twelve (12) hours after application. <br /> <br />15. The finish shall be free from objectionable odor and must not develop an offensive odor <br />upon storage in the original, unopened container. <br /> <br />16. The finish shall be suitable for high speed (1500 to 2500 RPM) burnishing. <br />END OF SECTION <br /> <br /> <br /> <br />