Laserfiche WebLink
THE CITY OF SUNNY ISLES BEACH <br />PROJECT NO. 21-1011 <br />BUILDING DEPARTMENT RELOCATION TO ANNEX <br /> <br />Project No. 21-1011 November 2024 054000 Cold-Formed Metal Framing-3 <br /> <br />E. Welding: Qualify procedures and personnel according to AWS D1.1/D1.1M, "Structural <br />Welding Code--Steel," and AWS D1.3, "Structural Welding Code-- Sheet Steel." <br /> <br />F. Fire-Test-Response Characteristics: Where indicated, provide cold-formed metal framing <br />identical to that of assemblies tested for fire resistance per ASTM E 119 by a testing and <br />inspecting agency acceptable to authorities having jurisdiction. <br /> <br />G. AISI Specifications and Standards: Comply with AISI's "North American Specification for <br />the Design of Cold-Formed Steel Structural Members" and its "Standard for Cold-Formed <br />Steel Framing - General Provisions." <br /> <br />H. Pre-installation Conference: Conduct conference at Project site to comply with <br />requirements in Division 01 Section "Project Management and Coordination." <br /> <br />1.7 DELIVERY, STORAGE, AND HANDLING <br /> <br />A. Protect cold-formed metal framing from corrosion, deformation, and other damage during <br />delivery, storage, and handling. <br /> <br />B. Store cold-formed metal framing, protect with a waterproof covering, and ventilate to avoid <br />condensation. <br /> <br />PART 2 - PRODUCTS <br /> <br />2.1 MANUFACTURERS <br /> <br />A. Available Manufacturers: Subject to compliance with requirements, manufacturers offering <br />cold-formed metal framing that may be incorporated into the Work include, but are not <br />limited to, the following: <br /> <br />B. Manufacturers: Subject to compliance with requirements, provide cold-formed metal <br />framing by one of the following: <br /> <br />1. Allied Studco. <br /> <br />2. AllSteel Products, Inc. <br /> <br />3. Clark Steel Framing. <br /> <br />4. Dietrich Metal Framing; a Worthington Industries Company. <br /> <br />5. SCAFCO Corporation. <br /> <br />6. Super Stud Building Products, Inc. <br /> <br />2.2 MATERIALS <br /> <br />A. Steel Sheet: ASTM A 1003/A 1003M, Structural Grade, Type H, metallic coated, of grade <br />and coating weight as follows: <br /> <br />1. Grade: As required by structural performance. <br />2. Coating: G60, A60, AZ50, or GF30. <br />