My WebLink
|
Help
|
About
|
Sign Out
Home
Browse
Search
Attachment C - Biddding Specification 1-23-25
SIBFL
>
City Clerk
>
Bids-RFQ-RFP
>
ITB
>
(25-01-01) City Annex Building Construction Renovations
>
INVITATION TO BID 25-01-01 CITY ANNEX BUILDING CONSTRUCTION RENOVATIONS
>
Attachment C - Biddding Specification 1-23-25
Metadata
Thumbnails
Annotations
Entry Properties
Last modified
2/20/2025 9:22:18 AM
Creation date
2/20/2025 9:18:50 AM
Metadata
Fields
Template:
CityClerk-Bids_RFP_RFQ
Project Name
City Annex Building Construction Renovations
Bid No. (xx-xx-xx)
25-01-01
Project Type (Bid, RFP, RFQ)
Bid
Jump to thumbnail
< previous set
next set >
There are no annotations on this page.
Document management portal powered by Laserfiche WebLink 9 © 1998-2015
Laserfiche.
All rights reserved.
/
960
PDF
Print
Pages to print
Enter page numbers and/or page ranges separated by commas. For example, 1,3,5-12.
After downloading, print the document using a PDF reader (e.g. Adobe Reader).
View images
View plain text
THE CITY OF SUNNY ISLES BEACH <br />PROJECT NO. 21-1011 <br />BUILDING DEPARTMENT RELOCATION TO ANNEX <br /> <br />Project No. 21-1011 November 2024 061000 Rough Carpentry-5 <br /> <br />A. Galvanized for exterior use and prime coated for interior use, except that truss and rafter <br />anchors, seats, and hangers shall be galvanized. <br /> <br />1. Strap Anchors: Not less than 1" x 1/8" in cross section. <br /> <br />2. Seats and Hangers: Not less than 18 gauge. <br />2.5 NAILS <br /> <br />A. Galvanized for permanent exterior use. Common wire nails for other temporary and interior <br />use. <br /> <br />2.6 WOOD TREATMENT <br /> <br />A. Wood Preservative for On-Site Use: Pentachlorophenol or equal, 5% solution in light <br />petroleum vehicle, water repellent type, colored for framing lumber, clear for exposed <br />framing and millwork, or any other preservative that has been proved equal or better in <br />tests performed by a technical laboratory, subject to approval by the Architect. <br /> <br />B. Preservative Treatment: Comply with applicable requirements of AWPA Standards C2 <br />(Lumber and C9 (Plywood) and of AWPB Standards listed below. Mark each treated item <br />with the AWPB Quality Mark Requirements. <br /> <br />1. Pressure treats above ground items with waterborne preservatives to comply with <br />AWPB LP-2. After treatment, kiln dry lumber and plywood to a maximum moisture <br />content, respectively, of 19 percent and 15 percent. Treat indicated items and <br />the following: <br /> <br />a. Wood cants, Nailers, curbs, equipment support bases, blocking, stripping, <br />and similar members in connection with roofing, flashing, vapor barriers <br />and waterproofing. <br />b. Wood sills, sleepers, blocking, furring, stripping and similar concealed <br />members in contact with masonry or concrete. <br />c. Wood framing members less than 18 in. above grade. <br />d. Wood floor plates installed over concrete slabs directly in contact with <br />earth. <br /> <br />2. Pressure treats the following with waterborne preservatives for ground contact <br />use complying with AWPB LP-22: <br /> <br />a. Wood members in contact with ground. <br />b. Wood members in contact with fresh water. <br /> <br />3. Complete fabrication of treated items prior to treatment. If cut after treatment, <br />coat cut surfaces with heavy brush coat of same chemical used for treatment and <br />to comply with AWPA M4. Inspect each piece of lumber or plywood after drying <br />and discard damaged or defective pieces. <br /> <br />2.7 FIRE RETARDANT TREATMENT (FRT) <br /> <br />A. Pressure treats all wood and plywood used for work of this Section. Provide treatment in
The URL can be used to link to this page
Your browser does not support the video tag.