Laserfiche WebLink
THE CITY OF SUNNY ISLES BEACH <br />PROJECT NO. 21-1011 <br />BUILDING DEPARTMENT RELOCATION TO ANNEX <br />Project No. 21-1011 November 2024 076200 Flashing and Sheet Metal-3 <br /> <br /> <br /> <br />C. Reglet sealant: <br /> <br />Test Typical Value Test Method <br />Rheological Properties No flow, ASTM C 920 <br /> @ 40° & 122°F no deformation <br />Extrusion Rate 7 seconds ASTM C 920 <br />Hardness Properties 40 ASTM C 920 <br />Weight Loss 9% ASTM C 920 <br />Tack Free Time 30 Hours ASTM C 920 <br />Stain & Color Change No visible change, ASTM C 920 <br />no stain <br />Durability - Cyclic Less than 1-1/2in2 ASTM C 920 <br />Movement <br />Adhesion & Cohesion Total Bond Loss <br />Bubble Formation Less than 1/16" ASTM C 920 <br />diameter <br />Adhesion-In-Peel Aluminum 18-22 pli ASTM C 920 <br />Concrete 20-25 pli <br />Brick 19-23 pli <br />No adhesion loss <br />Accelerated Aging No cracks greater ASTM C 920 <br />than #2 on U.V. and Cold Temperature <br />Bond Test <br />Asbestos Content 0% EPA 600/R-93/116 <br /> <br />D. Gravel stops and fascia systems: Shall be a three-part assembly designed for built-up or <br />modified bitumen roofs; consisting of continuous galvanized steel water dam, exterior <br />fascia and continuous compression clamp with fasteners. <br /> <br />E. Coping and Area divider covers: Metal coping cap, anchor cleats and draining splice plates <br />for capping any parapet wall. The system shall be watertight and not require exposed <br />fasteners or sealant. Joints shall be butt-type with concealed draining splice plates. <br /> <br />2.3 FLEXIBLE FLASHINGS: <br /> <br />A. Flashing ply sheet: <br /> <br />1. Flashing Base Ply Felt: <br /> <br />Test Typical Value Test Method <br />Thickness, mils (mm) 140 (3.5) ASTM D 6222 <br />Maximum Load, 73.4 + 3.6ºF ASTM D 6222 <br /> (23 + 2ºC), lbf/in (kN/m) <br /> MD 100 (17.5) <br /> XMD 64 (11.2) <br />Elongation at Max. Load, % ASTM D 6222 <br /> 73.4 + 3.6ºF (23 + 2ºC), <br /> MD 61 <br /> XMD 76