Laserfiche WebLink
THE CITY OF SUNNY ISLES BEACH <br />PROJECT NO. 21-1011 <br />BUILDING DEPARTMENT RELOCATION TO ANNEX <br /> <br />Project No. 21-1011 November 2024 081113 Hollow Metal Doors and Frames-1 <br /> <br />SECTION 081113 <br />HOLLOW METAL DOORS AND FRAMES <br /> <br />PART 1 - GENERAL <br /> <br />1.1 SUMMARY <br /> <br />A. Section includes: Hollow metal steel doors and frames including necessary accessories <br />indicated on Drawings and specified in this Section and finish hardware installation. <br /> <br />1.2 REFERENCE STANDARDS <br /> <br />A. Except as otherwise specified herein or shown on the Drawings, comply with the latest <br />editions of all applicable codes and regulations including the applicable requirements of the <br />following Reference Standards and Codes which are hereby made a part of this Section, as <br />they relate to the metal doors and frames. <br /> <br />1. Florida Building Code, 2023 Edition. <br /> <br />2. Design Wind Loads for Exterior Doors: ASCE 7-10 <br /> <br />3. The Occupational Health and Safety Administration (OSHA) Code of Federal <br />Regulations (CFR), Volume 29. <br /> <br />4. American Society for Testing and Materials (ASTM): <br /> <br />a. A366-96 Specification for Steel, Sheet, Carbon, Cold-Rolled, Commercial <br />Quality. <br />b. A653/A-96 Specification for Steel Sheet, Zinc-Coated (Galvanized) or <br />ZincIron Alloy-Coated (Galvannealed) by the Hot-Dip Process. <br />c. A924/A-96a Specs for General Requirements for Steel Sheet, <br />MetallicCoated by the Hot-Dip Process. <br />d. C270-96a Specification for Mortar for Unit Masonry. <br /> <br />5. Factory Mutual (FM), latest edition. <br /> <br />6. National Builders Hardware Association - "Recommended Locations for Builders", <br />latest edition. <br /> <br />7. Steel Door Institute (SDI), latest editions. <br /> <br />a. SDI 100-Standard Steel Doors and Frames, latest edition. <br />b. SDI 105-Recommended Erection Instructions for Steel Frames. <br />c. SDI 107-Hardware on Steel Doors (reinforcement application). <br /> <br />8. Underwriters Laboratories (UL), latest edition. <br /> <br />9. UL 1784 Air Leakage Test of Door Assemblies. <br /> <br />10. National Fire Protection Association (NFPA) <br />