Laserfiche WebLink
Page 11 of 22 <br /> <br />safely. Soft, hilly, or unbalanced ground may cause the <br />crane to overturn. Ensure the crane is operating on level, <br />stable foundation. Operation to perform inspection prior to <br />operating crane. <br /> <br />➢ Rigging ➢ All rigging to be inspected as often as possible, no later than <br />monthly. Rigging to be inspected prior to crane use on a <br />project site. Ensure proper tag with weight, date, type of <br />material is on the rigging to be used. Any rigging to be <br />found defective, to be replace and not used. <br /> <br /> <br />1.3. OCCUPATIONAL RISK PREVENTION <br /> <br />1.3.1. Individual Protective Equipment <br /> <br />All personal protection elements must follow OSHA 1926 Subpart E: Personal Protective and Life <br />Saving Equipment regulating the requirements that must be met by Personal Protection Elements. <br /> <br />With respect to those cases not covered by an official standard, these must be of a quality high <br />enough to adequately fulfil their purpose. <br /> <br />All workers must be issued with a breathable reflective vest, and this must be worn throughout the <br />entire working day. <br />Head Protection <br />- Safety hardhat. <br />- Anti-dust and anti-impact spectacles or googles. <br />- Auto filtering paper mask. <br />- Safety screen for welding. <br />- Ear protection <br /> <br />Body protection <br />- Overall. <br />- Raincoat <br />- Leather apron for welders <br />- Safety vest <br />- Steel toe boots <br /> <br />Upper extremities protection <br />- General use safety gloves <br />- Neoprene gloves <br />- Dielectric gloves for LV <br />- Welder gloves <br /> <br />Lower extremities protection