Laserfiche WebLink
• <br /> itrern Site Specific Instructions <br /> General Requirements <br /> Antenna will be connected to Feedline using''/:"Jumpers. <br /> Top Jumper should be installed with a Service Loop to help absorb stress and vibrations as well as <br /> facilitate Service and Testing. <br /> Top Jumper must be properly supported with Coax Hangers. <br /> Standoffs for Top Jumper should be used to minimize stress on connectors if Needed. <br /> Hangers should be installed within 8"of any coax terminations. <br /> Coax Hanger minimum spacing of no greater than 3 feet. <br /> Top Ground Kit and Bottom Ground Kit is required and must be properly bonded to earth conductor. <br /> Surge Protection Device(Supplied by Itron)must be installed and connected to the Bottom Coax <br /> Cci nector. <br /> SPD must be properly grounded for Lighting Protection. <br /> Weatherproofing of all outdoor antenna connections is to be done using proper weatherproofing <br /> material and techniques. <br /> �l Y <br />