Laserfiche WebLink
Document management portal powered by Laserfiche WebLink 9 © 1998-2015 Laserfiche. All rights reserved.
• <br /> • We in Site Specific Instructions <br /> Mew�.wt&rims <br /> •i <br /> General Requirements <br /> Antenna will be connected to Feedline using W4"Jumpers. <br /> Top Jumper should be installed with a Service Loop to help absorb stress and vibrations as well as <br /> facilitate Service and Testing. <br /> Top Jumper must be properly supported with Coax Hangers. <br /> Standoffs for Top Jumper should be used to minimize stress on connectors if Needed. <br /> Hangers should be Installed within 8"of any coax terminations. <br /> Coax Hanger minimum spacing of no greater than 3 feet. <br /> Top Ground Kit and Bottom Ground Kit is required and must be properly bonded to earth conductor. <br /> Surge Protection Device(Supplied by Itron)must be installed and connected to the Bottom Coax <br /> Connector. <br /> OD must be properly grounded for Lighting Protection. <br /> Weatherproofing of all outdoor antenna connections is to be done using proper weatherproofing <br /> material and techniques. <br /> • <br />