Laserfiche WebLink
City of Sunny Isles Beach | Invitation to Bid No. 15‐07‐01 34   <br />  <br />to the facilities, and is in the best interest of the City, then the chemical shall be approved for use by the <br />Bidder. <br /> <br />Any additional costs associated with testing or using an alternate brand or chemical or with changing <br />from one brand to another brand will be borne by the Bidder, if the Bidder requested the test or change. <br /> <br />No ammonia, bleach or powdered cleanser shall be used in the performance of this work. <br /> <br />5.1 FLOOR FINISH STRIPPER WATER EMULSION-TYPE WAX OR FINISH REMOVER <br /> <br />Scope <br /> <br /> This specification covers commercial wax remover for use in stripping water emulsion floor wax <br />or finish (including the metal-link polymers) from vinyl, rubber, asphalt, and other composition <br />floor surfaces. Also for use as a heavy-duty cleaner for ceramic and conductive floors. <br /> <br /> The compound shall be a liquid of one grade only. <br /> <br />Requirements <br />1. The compound shall be homogeneous, highly concentrated free-flowing liquid so formulated that <br />it may be diluted with clear water. It shall be composed of synthetic detergents, alkaline builders <br />and sequestering agents. It shall not cause skin irritations when used in accordance with <br />directions. <br /> <br />2. The compound in use concentrates shall be free rinsing and free from any odor which might be <br />objectionable under conditions of use. <br /> <br />3. The compound shall not contain any fatty acid soaps. <br /> <br />4. The compound shall be stable and not lose its original effectiveness or otherwise deteriorate <br />when stored for none months in a closed shipping container at room temperature. <br /> <br />5. The non-volatile content shall not be less than 6.52 at 105C. ・ <br /> <br />6. The pH value of a 1.0% by weight solution shall not be more than 12.0 when tested by standard <br />pH meter. <br /> <br />7. The compound shall be completely miscible with tap water in all proportions. It shall be stable <br />and clear between a temperature range of 32F and 110F. ・・ <br /> <br />8. The floor wax removal compound shall remove 95% of a wax film as determined by instrumental <br />measurement, in which the reflectance of a light colored unwaxed standard linoleum panel is <br />compared with that of a panel which has been waxed with a standard dyed water emulsion wax