Laserfiche WebLink
City of Sunny Isles Beach | Invitation to Bid No. 15‐07‐01 39   <br />  <br />Westphalt Gravity Balance at 25 C. <br /> <br />3. The product shall contain no copper or magnesium except for trace amounts found in the water. <br /> <br />4. The product shall have a clean-smelling, ammonia type odor with no objectionable odors. <br /> <br />5. Flash Point: The product shall exhibit no measurable Flash Point when the Cleveland Closed Cup <br />or Tagliabue Cup Flash Point Test Apparatus is employed. <br /> <br />6. The product shall have Viscosity of Min. 3 to Max 5 Centipoises, when measured by the <br />Brookfield Viscosity Meter at 25C.・ <br /> <br />7. The product shall be free from non-aqueous solvents, such as hydrocarbons, ketones, esters, <br />pine oil, alcohol, etc. <br /> <br />5.7 GLASS CLEANER <br /> <br />Scope <br /> Liquid glass cleaner covered by this specification is intended primarily for use on windows, <br />mirrors, and other glass surfaces, <br />Requirements <br />1. The compound shall be a blend of synthetic organic detergents, alcohols, solvents, and <br />germicidal components. It shall not contain any perfume, ammonia or inorganic alkalis. <br /> <br />2. Cleaning Efficiency: When the compound is properly applied to glass surfaces and polished, it <br />shall leave the surface free from dust, grime, and ordinary soil material. <br /> <br />3. Flash Point: The flash point of the liquid shall be less than 27 C (80 F). <br /> <br />4. PH Value: The pH value of the liquid shall be not less than 7.0 or more than 9.0 at 25 C. <br /> <br />5. Compound shall be a concentrated product with a minimum dilution ratio of 5:1. <br /> <br />5.8 METAL - LINK POLYMER FLOOR FINISH <br /> <br />Scope <br /> This specification covers a self-polishing, slip resistant, all synthetic water emulsion floor finish <br />intended for use on, and not detrimental to, sealed or finished wood surfaces, asphalt tile, <br />linoleum, rubber, vinyl composition, painted concrete, terrazzo and cement surfaces. The product <br />is to be used without dilution. Acid sensitive emulsions are excluded. <br /> <br />