Laserfiche WebLink
SAMSON OCEANFRONT PARK <br />CITY OF SUNNY ISLES <br />TECHNICAL SPECIFICATIONS <br /> <br /> <br />CUTTING AND PATCHING 01045-2 <br /> B. Operational and Safety Limitations: Do not cut and patch operational elements or safety related <br />components in a manner that would result in a reduction of their capacity to perform in the manner <br />intended, including energy performance, or that would result in increased maintenance, or decreased <br />operational life or decreased safety. <br /> <br /> C. Visual Requirements: Do not cut and patch work exposed on the building's exterior or in its occupied <br />spaces, in a manner that would, in the Engineer's opinion, result in lessening the building's aesthetic <br />qualities. <br /> 1. Do not cut and patch work in a manner that would result in substantial visual evidence of cut and <br />patch work. <br /> 2. Remove and replace work judged by the Engineer to be cut and patched in a visually unsatisfactory <br />manner. <br /> 3. Retain the original installer or fabricator if possible, or another recognized experienced and <br />specialized firm for cutting and patching. <br /> <br />PART 2 - PRODUCTS <br /> <br />2.01 MATERIALS <br /> <br />: <br /> A. General: Except as otherwise indicated, or as directed by the Engineer, use materials for cutting and <br />patching that are identical to existing materials. <br /> <br /> B. If identical materials are not available or cannot be used, use materials that match existing adjacent <br />surfaces to the fullest extent possible with regard to visual effect. <br /> <br /> C. Use materials for cutting and patching that will result in equal-or-better performance characteristics. <br /> <br /> <br />PART 3 - EXECUTION <br /> <br />3.01 INSPECTION <br /> <br />: <br /> A. Before cutting, examine the surfaces to be cut and patched and the conditions under which the work is to <br />be performed. If unsafe or otherwise unsatisfactory conditions are encountered, take corrective action <br />before proceeding with the work. <br />1. Coordinate layout of the work and resolve potential conflicts before proceeding with the work. <br /> <br />3.02 PREPARATION <br /> <br />: <br /> A. Temporary Support: To prevent failure, provide temporary support of work to be cut. <br /> <br /> B. Protection: Protect other work during cutting and patching to prevent damage. Provide protection from <br />adverse weather conditions for that part of the project that may be exposed during cutting and patching <br />operations. <br /> 1. Avoid interference with use of adjacent facilities or interruption of free passage to adjacent <br />facilities. <br /> 2. Take precautions not to cut existing pipes, conduits or ducts serving the building but scheduled to <br />be relocated until provisions have been made to by-pass them. Coordinate with the Engineer. <br /> <br />3.03 PERFORMANCE <br /> <br />: <br /> A. General: Employ skilled personnel to perform cutting and patching work. Except as otherwise indicated