Laserfiche WebLink
<br />01600 - 2/6 <br />a. Design, fabricate, and assemble in accordance with the best engineering <br />and shop practices. <br />b. Manufacture like parts of duplicate units to standard sizes and gauges, to <br />be interchangeable. <br />c. Equipment and Materials shall be suitable for service conditions intended. <br />d. Equipment capacities, sizes, and dimensions indicated or specified shall <br />be adhered to unless variations are specifically approved in writing. <br />e. Provide labels and nameplates where required by regulatory agencies or <br />to state identification and essential operating data. <br />f. Two or more items of the same kind shall be identical, supplied by the <br />same manufacturer. <br />4. Do not use equipment and material for any purpose other than that for which it <br />is designed or is specified. <br />D. Source Limitations: To the fullest extent possible, provide products of the same kind <br />from a single source. <br />E. Identification: Each item of equipment shall have permanently affixed to it a label or <br />tag with its equipment number designated in this contract. Marker shall be stainless <br />steel and shall be located so as to be easily visible. <br />1.04 TRANSPORTATION AND SHIPMENT: <br />A. Shipment Preparation: Contractor shall require manufacturers and suppliers to <br />prepare Equipment and Materials for shipment in a manner to facilitate unloading <br />and handling, and to protect against damage or unnecessary exposure in transit and <br />storage, for contractor supplied equipment. Provisions for protection shall include <br />the following: <br />1. Crates or other suitable packaging materials. <br />2. Covers and other means to prevent corrosion, moisture damage, mechanical <br />injury, and accumulation of dirt in motors, electrical equipment, and machinery. <br />3. Suitable rust-preventive compound on exposed machined surfaces and <br />unpainted iron and steel. <br />4. Grease packing or oil lubrication in all bearings and similar items. <br />5. Precast concrete components shall be transported, lifted and stored as <br />specified by the precast supplier. Precast supplier shall provide written <br />instructions to the Contractor as to the above Contractor shall provide a copy <br />to City. <br />B. Marking: Each item of Equipment and Material shall be tagged or marked as <br />identified in the delivery schedule or on Submittals. Complete packing lists and bills <br />of material shall be included with each shipment. Each piece of every item need not <br />be marked separately, provided that all pieces of each item are packed or bundled <br />together and the packages or bundles are properly tagged or marked. <br /> <br />1.05 DELIVERY, STORAGE AND HANDLING: <br /> <br />A. Delivery: