ITB 16-04-01 172nd Drainage Repairs (Final)

Home Browse Search

City of Sunny Isles Beach | Invitation to Bid No. 16-04-01 20 xv. SSPWC 210-2.3.3 - Chemical resistance testing published in the Standard Specifications for Public W orks Construction (otherwise known as “The Greenbook”). b. SUBMITTALS i. PRODUCT DATA 1 Technical data sheet on each product used. 2. Material Safety Data Sheet (MSDS) for each product used 3. Copies of independent testing performed on the coating product indicating the product meets the requirement as specified herein. 4. Technical data sheet and project specific data for repair materials to be top-coated with the coating product(s) including application, cure time and surface preparation procedures. ii. CONTRACTOR DATA 1. Current documentation from coating product manufacturer certifying Contractor’s training and equipment complies with the Quality Assurance requirements specified herein. 2. Five (5) recent references of Contractor indicating successful application of coating product(s) of the same material type as specified herein, applied by spray application within the municipal wastewater environment. c. QUALITY ASSURANCE i. Coating product(s) shall be capable of being installed and curing properly within a manhole environment. Coating product(s) shall be resistant to all forms of chemical or bacteriological attack found in municipal sanitary sewer systems; and, capable of adhering to the manhole structure substrates. ii. Repair product(s) shall be fully compatible with coating product(s) including ability to bond effectively forming a composite system. iii. Contractor shall utilize equipment for the spray application of the coating product(s) which has been approved by the coating product manufacturer; and, Contractor shall have received training on the operation and maintenance of said equipment from the coating product manufacturer. iv. Contractor shall be trained by, or have their training approved and certified by, the coating product manufacturer for the handling, mixing, application and inspection of the coating product(s) to be used as specified herein. v. Inspectors shall be trained in the use of testing or inspection instrumentation and knowledgeable of the proper use, preparation and installation of the coating product(s) to be used as specified herein. vi. Contractor shall initiate and enforce quality control procedures consistent with the coating product(s) manufacturer recommendations and applicable NACE or SSPC standards as referenced herein. vii. Pre-construction meeting shall take place no less than two weeks prior to Contractor mobilization. All parties to have physical presence on the project during construction shall be present. At this meeting responsibilities and authorities during construction shall be discerned; comments and questions regarding materials and execution of these specifications shall be presented and addressed.