Laserfiche WebLink
Draft Scope of Services <br /> Citywide Coastal Monitoring Program <br /> ^ T� City of Sunny Isles, Miami-Dade County,Florida <br /> Septem , <br /> SDI Pber.N.2916-24222016 <br /> I)!VI;RSII'IIiI) Page 3 of4 <br /> monument is located more than 300 feet landward of the vegetation line, data points shall be <br /> extended to one hundred (100) foot intervals from two hundred (200) feet landward of the <br /> approximate vegetation line to the monument location. The reference monument shall be recorded as <br /> range 0.0 along the profile with positive ranges extending seaward of the monument and negative <br /> ranges extending landward of the monument. <br /> Offshore Profile Data Collection -Bathometric <br /> Bathymetric profile data at R-monuments and intermediate points, as applicable, shall be collected <br /> as close to high tide as practical and shall extend landward to a depth that overlaps the onshore <br /> portion of the survey. Bathymetric profile data collection at R-monuments shall extend offshore a <br /> minimum distance of 3000 feet from the shoreline or to—30 feet (NAVD), whichever point is reached <br /> first. Bathymetric profile data collection at intermediate profile points shall extend offshore a <br /> minimum distance of 1000 feet from the approximate shoreline. Bathymetric data collection shall <br /> occur as close to the time of the onshore topographic survey as practical with the objective to not <br /> exceed seven (7) days of time difference between the two (2) survey events. Maximum wave height <br /> during the course of bathymetric data collection shall be three (3) feet. <br /> Bathymetric data shall be collected using an automated hydrographic system comprised of a survey <br /> launch equipped with an Odom marine grade sounder with integrated motion sensor, Differential <br /> Global Positioning System (DGPS) and computer-based navigation / data collection system. The <br /> motion sensor will be employed to reduce the effects of vessel heave, pitch and roll during the course <br /> of data collection. The sounder shall be calibrated via bar checks prior to the start of the survey. <br /> • Prior to the start of the survey a tide staff or gauge will be established in proximity to the project for <br /> recording water levels during the course of the data collection activities. The tide staff or gauge will <br /> • be set relative to published control in the vicinity of the project. <br /> Digital Ground Photography <br /> During the course of field data collection, digital photographs shall be taken at approximate mid- <br /> beach along each profile line. Three (3) photographs shall be captured, one each shore-parallel north <br /> and south of the profile and one towards the monument location. An additional photograph of the <br /> monument or TBM shall be taken with sufficient clarity to read the monument stamping. Digital <br /> images shall be provided to the City of Sunny Isles Beach and BBCS on CD or DVD media in .jpg <br /> format at a minimum 640 x 480 resolution. <br /> Data Processing and Final Deliverables <br /> Upon completion of field survey activities, data will be edited and reduced to the project datum and <br /> translated to an x,y,z, ASCII format for submittal to the City and BBCS. In addition, and in <br /> accordance with the Specifications, the following deliverables will be provided: <br /> 1. Survey report/ monument control report certified by a Professional Surveyor and Mapper. <br /> 2. Copies of field books and data collection files, as applicable. (hardcopy and PDF'format) <br /> 3. Description of all monuments and TBM's used for the survey, including identification, <br /> stamping, coordinates, elevations and profile azimuths. Control description shall be <br /> provided in both hardcopy and digital formats (ASCII and Excel) <br /> 4. Final profile data in ASCII x,y,z format and FDEP distance / depth format with associated <br /> header records <br /> 5. ASCII raw data file <br /> 6. Digital photographs in .jpg format with appropriate labeling <br /> 7. Plan / profile charts in AutoCAD .dwg format <br /> 8. Plan / profile charts in hardcopy format (24"x 36") <br /> 9. Metadata files <br /> 10. Survey Report <br /> Surveying • Engineering • Applications <br />