Reso 2004-723 - Laserfiche WebLink

Home Browse Search

B, Systems Drawings: All drawings committed to Owner shall be generated on computer Aided Drafting (CAD) equipment. Quality plotter or Laser Printer hard copies are required, A copy of the drawing files shall also be delivered, C, Equipment Labels: All labels to be installed on equipment shall be engraved self-adhesive laminated or photo process Mylar composition with a lettering generated by printing equipment. 1.4, WORK BY OTHERS A, All cabling to be provided by Owner, 1. Cabling provided includes home runs from duress stations and buttons back to communications closets. 2, All cable terminations, splices, and other connections must be provided by Security Installer. 1.5, ACCEPTABLE MANUFACTURERS A, Only materials and equipment specified in theses specifications shall be considered without prior approval. In no case shall equipment or materials of lesser design, quality, or workmanship be acceptable, Newer models shall replace discontinued equipment. B. Substitution shall be permitted when submission of complete data on substitution has been reviewed and approved. For the terms of this specification, the following are defined as: 1, The term "or equal" shall allow any product that meets the overall performance specification of the listed product(s), 2, The term "or approved equal" shall mean that the base bid must include the listed product(s) but non-listed products will be considered under the following conditions: If the system bidder wishes to use a non-listed item, it must be listed as a separate addition or deduction alternate item outside of the base bid, with all appropriate documentation as to features, benefits, savings and performance specifications (as specified above) included. No alternates or non-listed items will be accepted without the base bid as specified. 3, If neither of the above terms is used, no alternate products shall be allowed. 1.6. WARRANTY AND SERVICE RESPONSIBILITY A. All equipment and components shall be guaranteed free of defects and any faulty workmanship for a period of one year after final acceptance, regardless of manufacturer warranty of a lesser period, B. The Contractor shall replace defective materials and repair faulty workmanship within twenty- four hours of discovery, except emergency conditions (system failures), which must be placed in service within six (6) hours after notification, all at no cost to the Owner. C, The system shall be guaranteed for a period of one (1) year from the date of final acceptance against defective materials, workmanship, and improper adjustment. Any defective material shall be replaced at no expense to the Owner, provided it does not show abuse. 1.7. TRAINING A. Provide a minimum of 2 hours of training per system to the owner or his designated personnel. If desired by the Owner, videotape the training session and provide a copy to the Owner for later review, reference, and to train new employees on the operation of the systems, 17715-2 8/04 SIB