Laserfiche WebLink
<br />3.4. ALARM REPORTING <br /> <br />A. Duress buttons shall report to lobby monitoring station and Police dispatch area, <br /> <br />B. Door closure switches shall report to lobby monitoring station and Police dispatch area. <br /> <br />C, Public Duress Call Stations "PUSH FOR HELP" button shall report to community E-911 and <br />Police dispatch. Public Duress Call Station, "INFO" button shall initiate a voice call to the lobby <br />monitoring station. <br /> <br />3,5, ADDITIONAL SYSTEM PROGRAMMING NOTES <br /> <br />A, Provide fully functional and programmed system(s) to Owner's requirements, <br /> <br />3.6, WIRING INSTALLATION <br /> <br />A, The Security system Installer shall insure that connections to locks, door switches, control <br />panels and consoles are complete and properly terminated. <br /> <br />B, All conductors shall meet or exceed manufacturer's minimum wire size for device, application, <br />and length of run, and shall be installed in common raceways and equipment enclosures with <br />other conductors. <br /> <br />C, Wiring systems shall use stranded copper conductors. <br /> <br />D, Wiring systems shall be individually color-coded. All colors shall be continuous from filed device <br />to last internal termination point. Colors shall be consistent as to function, i.e" Red-24VDC <br />positive, Black-24VDC negative. White or grey conductors shall be used only for neutral <br />conductors and green only for grounding conductors, <br /> <br />E. Conductors within junction and pull boxes and equipment enclosures shall be grouped and <br />laced with nylon tie straps with identification tab, in individual sets serving individuallocksets or <br />operating mechanisms. Conductor groups shall be identified on the strap tab with respect to <br />room or operator served, <br /> <br />F, Security system conductors shall not be spliced; conductors shall be continuous between <br />locksets and/or operators and terminations point for control. <br /> <br />G. Junction boxes and pull boxes required for installation of the security system wiring must be <br />installed to be fully accessible, Work under this section of the specification must be closely <br />coordinated with work of all other trades to comply with this requirement. <br /> <br />3,7. EQUIPMENT INSTALLATION <br /> <br />A, Hardware, screws, bolts, nuts, components and accessory fittings shall be of a type designed, <br />intended or appropriate for the use, ad complement the items which they are used, and shall <br />have corrosion protection suitable for the atmosphere in which they are installed, <br /> <br />B. Equipment, except portable equipment, shall be held firmly in place. This shall include <br />amplifiers, cameras, monitors, cables. Etc. Fastening and supports shall be adequate to <br />support their loads with a safety factor of at least five. Switches, connectors, outlets, etc., shall <br />be clearly, logically and permanently labeled during installation. <br /> <br />8/04 <br /> <br />17720-8 <br /> <br />SIB <br />