Laserfiche WebLink
<br />C. Exposed paver surfaces shall be thoroughly cleaned and free from any traces of stains. <br />At the Contractor's option, he may employ normal, on-site measures to protect exposed <br />brick surfaces from traces of stains, including waxing the exposed surface of the bricks. <br />The Contractor shall submit to the Consultant for approval, the method of protection and <br />cleaning of the paver surface prior to beginning any paver Work. Method of protection <br />and cleaning shall be incorporated in the sample paving panel. <br /> <br />1. Particular care shall be taken cleaning stains from the pavers. Cleaning agents <br />shall be as recommended by the paving manufacturer. <br />2. The Consultant shall review materials and method for cleaning paver blocks prior <br />to the Contractor installation of paving <br />3. Do not clean with acid. <br />4. Dispose of all excess materials following approved installation of all concrete <br />paver areas. <br />5. Cut paver with abrasive cut-off saw. Do not clip or crack. Cut surfaces shall be <br />concealed in the Work. <br />6. No paver saw dust resulting from cutting shall be permitted to be deposited or <br />disposed in planting areas. <br />7. After installation, seal pavers with Crystal Clear Sealer, as per specifications by <br />Cobble Coat, Pompano Beach, Florida, or approved equal. Apply two thin coats <br />(2-3 wet mils) per manufacturer's recommendations. (Do not seal pavers in <br />roadway or vehicular areas). <br /> <br />END OF SECTION <br /> <br />PAGE 106 OF 130 <br />Bm No. 08-10-01 <br />