Laserfiche WebLink
<br />required. Metal picket fences or other decorative fences which are less <br /> <br />than 50 percent solid shall be permitted in front setbacks, provided they <br /> <br />meet the 10 foot right of way setback and landscaping requirements for <br /> <br />other fences and walls as required per Section-217.2 (12.1). The <br /> <br />maximum fence height shall not exceed six (6) feet from grade and shall <br /> <br />be made of non ferrous materials. <br /> <br />Within any minimum required setback area. no wall or fence shall exceed a height <br /> <br />greater than six (6) feet from grade. except fences or walls placed upon the deck <br /> <br />of a roof and parapet walls may extend no more than six feet (6') above the roof <br /> <br />deck. <br /> <br />(15) Landscaping Requirements for walls and fences: Walls or fences which <br /> <br />are otherwise permitted to be located within the front or exterior side <br /> <br />setback shall be setback at least 10 feet from the right of way line and the <br /> <br />resulting setback area between the fence and the right of way line shall <br /> <br />contain a continuous extensively landscaped buffer which must be <br /> <br />maintained in a good healthy condition by the property owner or, where <br /> <br />applicable, by the condominium, homeowners or similar association. The <br /> <br />landscape buffer shall contain one or more of the following planting <br /> <br />materials: <br /> <br />(a) Shrubs. Shrubs shall be a minimum of three (3) feet in height <br /> <br />when measured immediately after planting and shall be planted <br /> <br />and maintained to form a continuous, unbroken, solid, visual <br /> <br />screen within one (1) year after time ofplantin&..QI <br /> <br />099-63 RU-4A Article XIX Amendment 3/5/99-1/12/00 8:16 AM draft. <br />Page 13 of 44 <br />