Specifications - Laserfiche WebLink

Home Browse Search

All samples will have been checked by and stamped with the approval of the CONTRACTOR, identified clearly as to material, manufacturer, any pertinent catalog numbers and the use for which intended. 6.25 At the time of each submission, the CONTRACTOR will in writing call the CONSULTANT'S attention to any deviations that the Shop Drawings or sample may have from the requirements of the Contract Documents. 6.26 The CONSULTANT will review with responsible promptness Shop Drawings and Samples, but their review shall be only for conformance with the design concept of the Project and for compliance with the information given in the Contract Documents. The review of a separate item as such will not indicate review ofthe assembly in which the items functions. The CONTRACTOR will make any corrections required by the CONSULTANT and will return the required number of corrected copies of Shop Drawings and resubmit new samples until the review is satisfactory to the CONSULTANT. The CONTRACTOR shall direct specific attention in writing or on resubmitted Shop Drawings to revisions other than the corrections called for by the CONSULTANT on previous submissions. The CONTRACTOR'S stamp of approval on any Shop Drawings or sample shall constitute representation to the CITY and the CONSULTANT that the CONTRACTOR has either determined and verified all quantities, dimension, field construction criteria, materials, catalog numbers and similar data or they assume full responsibility for doing so, and that they have reviewed or coordinated each Shop Drawing to sample with the requirements of the Work and the Contract Documents. 6.27 No Work requiring a Shop Drawing or sample submission shall be commenced until the submission has been reviewed by the CONSULTANT. A copy of each Shop Drawing and each approved sample shall be kept in good order by the CONTRACTOR at the site and shall be available to the CONSULTANT. 6.28 The CONSULTANT'S review of Shop Drawings or samples shall not relieve the CONTRACTOR from their responsibility for any deviations from the requirements of the Contract Documents unless the CONTRACTOR has in writing called the CONSULTANT'S attention to each deviation at the time of submission and the CONSULTANT has given written approval to the specific deviation, nor shall any review by the CONSULTANT relieve the CONTRACTOR from responsibility for errors or omission in the Shop Drawings. Cleaning up: 6.29 The CONTRACTOR shall clean up behind the Work as much as is reasonably possible as the Work progresses. Upon completion of the Work, and before acceptance of final payment for the Project by the CITY, the CONTRACTOR shall remove all their surplus and discarded materials, excavated material and rubbish from the roadways, sidewalks, parking areas, lawn and all adjacent property; shall clean their portion of Work involved in any building under this Contract, so that no further cleaning by the CITY is necessary prior to their occupancy; shall restore all property, both public and private, which has been disturbed or damaged during the prosecution of the Work; and shall leave the whole in a neat and presentable condition. 6.30 If the CONTRACTOR does not clean the Work site, the CITY may remove the rubbish and charge the cost to the CONTRACTOR Public Convenience and Safetv: 6.31 The CONTRACTOR shall, at all times, conduct the Work in such a manner as to insure the least practicable obstruction to public travel. The convenience of the general public and of the residents along and adjacent to the area of Work shall be provided for in a satisfactory manner, consistent with the operation and local conditions. "Street Closed" signs shall be placed immediately adjacent to the Work, in a conspicuous position, at such locations as traffic demands. At any time that streets are required to be closed, the CONTRACTOR shall notify law enforcement agencies before the street is closed and again as soon as it is opened. Access to fire hydrants and other fire extinguishing equipment shall be provided and maintained at all times. 00710-13