Cleaning Systems, Inc. - Laserfiche WebLink

Home Browse Search

laterial Safety Data Sheet 4/2.1 /00 9:00 AM contact may cause irritation, defatting of skin, and dermatitis. Absorption through intact skin is possible if contact with liquid is prolonged. Contact with liquid can also cause possible freeze bums. Vandalism Remover Page Z of 6 INGESTION: Aspiration hazard! INHALATION: Inhalation can cause dizziness, nausea, headache, anesthetic effects, rapid breathing, narcosis, vomiting, numbness and tingling in arms and legs, rapid heartbeat, loss of consciousness and death. CONDITIONS AGGRAVATED BY EXPOSURE: Alcoholism, acute and chronic liver and kidney disease, eye, respiratory and skin disorders, chronic lung disease, anemia, coronary disease or rhythm disorders of the heart may be aggrav ated by exposure to this product. HMIS RATING: HEALTH:(3) FIRE:(4) REACTIVITY:(0) PERSONAL EQUIPMENT:(B) SECTION 4 FIRST AID MEASURES • EYE: Flush eves with large amounts of water for 15 minutes while holding eyelids open. Seek medical attention if irritation persists. SKIN: Immediately remove contaminated clothing. Flush skin with large amounts of soap and water. Nash contaminated clothing betore reuse. To treat frostbite, gradually warm frostbite area with warm water (not to exceed 105° F) . If irritation occurs, get medical attention. INGESTION: If swallowed, DO NOT induce vomiting. Obtain medical attention without delay. If vomiting occurs spontaneously. keep head below hips to prevent aspiration of liquid into the lungs. • INHALATION: Remove to fresh air. Give artificial respiration if not breathing. Qualified personnel may give oxygen if breathing is difficult. Obtain medical attention immediately. ?VOTE TO PHYSICIAN: Treat patient symptomatically. SECTION FIRE FIGHTING MEASURES FLASH POINT :\D FLAMMABLE LIMITS: (Propellant): LEL: 1.9 UEL: 9.5 AUTO IGNITION TEMPERATURE: LD AEROSOL FLAMMABILITY: This product has been tested in accordance with the method described in 40 CFR 156.10 and found to be flammable. FIRE FIGHTING INSTRUCTIONS: Containers should be cooled with water to prevent vapor pressure build up. Use equipment or shielding, as required, to protect personnel from bursting, rupturing or venting containers. EXTINGUISHING MEDIA: water foo, dry chemical, foam, carbon dioxide Avoid a direct stream of water as product may float and can be reignited on surface of ,-rater. Vandalism Remover Page 3 of 6 HAZARDOUS COMBUSTION PRODUCTS: hydrogen chloride, phosgene. chlorine, carbon monoxide, carbon dioxide, volatile hydrocarbon vapors, SPECIAL HAZARDS: At elevated temperatures (over 130° Fi54° C) containers exposed to direct flame or heat contact should be