Reso 2010-1605 - Laserfiche WebLink

Home Browse Search

, manufacturer's name, or by catalog reference, use only such item, unless written approval for substitution is secured. .7 No portion of the Work requiring submission of Submittals shall be commenced or fabricated by the Contractor except at the Contractor's own risk, until the Submittal has been reviewed by the City. All such portions of the Work shall be in accordance with reviewed Submittals. .8 By approving and submitting Shop Drawings, Product Data, Manuals and Samples, etc. the Contractor represents that the Contractor has determined and verified all materials, field measurements, and field construction criteria and that the Contractor has checked and coordinated the information contained within such submittals with the requirements of the Work and of the Contract Documents. The Contractor shall adhere to any supplementary processing and scheduling instructions pertaining to Shop Drawings, which may be issued by the City. .9 Parts and details not fully indicated on the contract drawings shall be detailed by the Contractor in accordance with standard engineering practice. Dimensions on the Contract Drawings, as well as detailed drawings themselves are subject in every case to measurements of existing, adjacent, incorporated and completed work, which shall be taken by the Contractor before undertaking any work dependent on such data. 3.8.6 By approving and submitting Shop Drawings, Product Data, Samples and similar submittals, the Contractor represents such Submittals strictly comply with the requirements of the Contract Documents and that the Contractor has determined and verified field measurements and field construction criteria related thereto, that materials are fit for their intended use and that the fabrication, shipping, handling, storage, assembly and installation of all materials, systems and equipment are in accordance with best practices in the industry and are in strict compliance with any applicable requirements of the Contract Documents. Contractor shall also coordinate each Submittal with other Submittals. 3.8.7 Contractor shall be responsible for the correctness and accuracy of the dimensions, measurements and other information contained in the Submittals. In the event Submittals have been rejected two or more times as a result of the Contractor's failure to submit the proper documentation, the Contractor shall be responsible for the cost associated with the AlE's review. The Contractor shall make corrections required by the City and shall resubmit the required number of corrected copies of Submittals. The Contractor shall direct specific attention, in writing or on resubmitted Submittals, to revisions other than those requested by the City on previous Submittals. Resubmittals necessitated by required corrections due to Contractor's errors or omissions shall not be cause for extension of Contract Time. 3.8.8 Each Submittal will bear a stamp or specific indication that the Submittal complies with the Contract Documents and Contractor has satisfied its obligations under the Contract Documents with respect to Contractor's review and approval of that Submittal. Each Submittal shall bear the signature of the representative of Contractor who approved the Submittal, together with the Contractor's name, City's name, number of the Project, and the item name and specification section number. ., 16 I