Laserfiche WebLink
IPART2- PRODUCTS <br />2.01 TREE PROTECTION FENCING <br />A. Tree protection fencing shall be: <br />' I. Mesh fence 6 ft. high minimum, with 4 "x4 "x6' pressure treated wood posts. <br />B. Posts shall be spaced 1 Oft. on center maximum. <br />C. Fencing other than that specified above shall be subject to the approval of the Architect. <br />PART 3 - EXECUTION <br />3.01 INSTALLATION OF FENCING <br />A. Prior to start of demolition work and clearing and grubbing operations, tree protection <br />fencing shall be installed in accordance with the following: <br />1 1. Fencing shall be installed at the tree protection areas as directed by the <br />Landscape Architect. <br />2. Fencing shall be located along the cut and fill lines staked by the project <br />surveyor and approved by the Architect and Owner. <br />3.02 ROOT PRUNING <br />A. Where construction will be in close proximity to existing trees designated to remain, <br />roots shall be pruned. Proximity shall be as determined in the field by the Architect. Root <br />pruning shall be performed as specified in Section 02490 TREES, PLANTS AND <br />' GROUND COVERS. <br />3.03 CLEARING WITHIN PROTECTION AREAS <br />A. Selective clearing within tree protection areas shall only be performed when and as <br />directed by the Architect. <br />3.04 REMOVAL OF PROTECTION <br />A. Except as otherwise indicated or requested by Architect, temporary protection devices <br />and facilities installed during course of the work shall be removed only after all work <br />which may injure or damage trees and plants is completed. <br />IEND OF SECTION <br />1 06/05 01532 -2 03- 4138.B <br />