Reso 2011-1661 - Laserfiche WebLink

Home Browse Search

7. Inspection at Contractor's Site. The Customer reserves the right to inspect, at any reasonable time with prior notice, the equipment or product or plant or other facilities of a Contractor to assess conformity with Contract requirements and to detemrine whether they are adequate and suitable for proper and effective Contract performance. 8. Safety Standards. All manufactured items and fabricated assemblies subject to operation under pressure, operation by connection to an electric source, or operation involving connection to a manufactured, natural, or LP gas source shall be constnlcted and approved in a manner acceptable to the appropriate State inspector. Acceptability customarily requires, at a minimum, identification marking of the appropriate safety standard organization, where such approvals of listings have been established for the type of device offered and furnished, for example: the American Society of Mechanical Engineers for pressure vessels; the Underwriters Laboratories and/or National Electrical Manufacturers' Association for electrically operated assemblies; and the American Gas Association for gas-operated assemblies. In addition, all items furnished sha1l meet all applicable requirements of the Occupational Safety and Health Act and state and .federal requirements relating to clean air and water pollution. 9. Americans with Disabilities Act Contractors should identifY any products that may be used or adapted for use by visually, hearing, or other physically impaired individuals. 10. Literature. Upon request, the Contractor shall furnish literature reasonably related to the product offered, for example, user manuals, price schedules, catalogs, descriptive brochures, etc. 11. Traosp.ortatioD and Delivery. Prices shall include all charges for packing, handling, freight, distributiQn, and inside delivery. Transportation of goods shall be FOB Destination to any point within thirty (30) days after the Customer places an Order. A Contractor, within five (5) days after receiving a purchase order, shall notify the Customer of any potential delivery delays. Evidence of inability or .intentional delays shall be cause: for Contract cancellation and Contractor suspension. 12. Installation. Where installation is required, Contractor shall be responsible for placing and installing the product in the required locations at no additional charge, unless other\'...ise designated on the Contract or purchase order. Contractor's authorized product and price list shall clearly and separately identify any additional installation charges. All materials used in the installation shall be of good quality and shall be free of defects that would diminish the appearance of the product or render it structurally or operationally unsound. Installation includes the furnishing of any equipment, rigging, and materials required to install or replace the product in the proper location. 'Contractor shall protect the site from damage and shall repair damages or injury caused during installation by Contractor or its employees or agents, If any alteration, dismantling, excavation. etc., is required to achieve installation, the Contractor shall promptly restore the structure or site to its original condition. Contractor shall perform installation work so 'as' to- cause. the 'least inconvenience and .interference .with .Gustemers .and .with. -proper consideration of others on site. Upon completion of the installation, the location and sWTounding area of work shall be left clean and in a neat and unobstructed condition, with everything in satisfactory repair and order. .,,, (\Y. !q ~>> l'otl