Laserfiche WebLink
<br />7.8.11.1.4.1.4 Spray evenly in block patterns. <br />Allow at least 10 minutes of <br />dwell time. <br />7.8.11.1.4.1.5 Extra agitation may be required <br />in excessively soiled areas <br />using a 175 RPM machine with <br />a soft carpet brush attachment. <br />7.8.11.1.4.1.6 Agitate pre-sprayed areas only. <br />Then rinse extract with an <br />extraction machine. <br /> <br />7.8.11.1.4.2 <br /> <br />Rinse Extraction <br /> <br />7.8.11.1.4.2.1 <br /> <br />Fill extractor with a mixture <br />of hot water and Ramsey <br />Rinsoft of equal. <br /> <br />7.8.11.1.4.2.2 <br /> <br />Mix 1 oz. Per gallon. Do not <br />over dilute chemical. <br /> <br />7.8.11.1.4.2.3 <br /> <br />Extract areas that have been <br />pre-sprayed. Note: do not allow <br />pre-spray to dry before being <br />extracted. Note: this step deep <br />cleans carpet fibers, removes any <br />detergent and neutralizes the pH. <br /> <br />7.8.11.1.4.2.4 Carpet blowers may be utilized to <br />reduce drying time. <br /> <br />DOCUMENT CONTINUES ON NEXT PAGE <br />