Laserfiche WebLink
<br />Copyright 2002 and 2005 AIA <br /> <br />MASTERSPEC Full Length <br /> <br />11/02 (R 02/06) <br /> <br />B. The allowance does not include incidentallabor required to assist the testing agency or costs for <br />retesting if previous tests and inspections result in failure. The cost for incidental labor to assist <br />the testing agency shall be included in the Contract Sum. <br /> <br />C. Costs of services not required by the Contract Documents are not included in the allowance. <br /> <br />D. At Project closeout, credit unused amounts remaining in the testing and inspecting allowance to <br />Owner by Change Order. <br /> <br />1.9 UNUSED MATERIALS <br /> <br />A. Return unused materials purchased under an allowance to manufacturer or supplier for credit to <br />Owner, after installation has been completed and accepted. <br /> <br />1. If requested by Architect, prepare unused material for storage by Owner when it is not <br />economically practical to return the material for credit. If directed by Architect, deliver <br />unused material to Owner's storage space. Otherwise, disposal of unused material is <br />Contractor's responsibility. <br /> <br />PART 2 - PRODUCTS (Not Used) <br /> <br />PART 3 - EXECUTION <br /> <br />3.1 EXAMINATION <br /> <br />A. Examine products covered by an allowance promptly on delivery for damage or defects. Return <br />damaged or defective products to manufacturer for replacement. <br /> <br />3.2 PREPARATION <br /> <br />A. Coordinate materials and their installation for each allowance with related materials and <br />installations to ensure that each allowance item is completely integrated and interfaced with <br />related work. <br /> <br />3.3 SCHEDULE OF ALLOWANCES <br /> <br />A. Allowance No. <Insert number>: Include <Insert allowance description> as specified in <br />Division <Insert Division number> Section "<Insert Section title>"[ and as shown on <br />Drawings] . <br /> <br />END OF SECTION 01210 <br /> <br />ALLOWANCES <br /> <br />01210 - 3 <br />