Laserfiche WebLink
<br />..., <br /> <br />. <br /> <br />..., <br /> <br />. <br /> <br />,., <br />. <br /> <br />-, <br />. <br /> <br />M <br /> <br />. <br /> <br />r-, <br />. <br /> <br />'i <br />. <br /> <br />I 1 <br />. <br /> <br />,., <br />. <br /> <br />.., <br /> <br />. <br /> <br />,., <br />. <br /> <br />,.., <br /> <br />. <br /> <br />,., <br />. <br /> <br />., <br /> <br />. <br /> <br />, <br />. <br /> <br />r, <br />. <br /> <br />r"1 <br /> <br />. <br /> <br />.... <br /> <br />. <br /> <br />..., <br /> <br />. <br /> <br />Type of Type of Survey Threshold Remedial Work <br />Distress Values <br /> Automated See Table 338-1 See Table 338-1 <br /> Measurement <br />Rutting Manual Depth > 0.4 Remove and replace 1.5 inch the full <br /> Measurement (1) inch lane width for the area plus 50 feet with <br /> rutting equal to or greater than 0.4 inch. <br /> Cumulative <br /> length 0 <br />Cracking Any Survey cracking > 300 See Table 338-1 <br /> eet for Cracks <br /> > 1/8 inch <br />Surface Any Survey See Table 338-1 See Table 338-1 <br />Deterioration (2) (11 Rutting: Rut depth to be determined manually in accordance with the Flexible Pavemen <br />Condition Survey Handbook, with readings taken at 20 foot spacing over the distressed <br />area. An area will be deficient when the average of three consecutive readings exceeds 0.4 <br />inch. <br />(2) Surface Deterioration: As used in Table 338-2, Surface Deterioration includes Raveling <br />and/or Delamination affecting the Friction Course, Pot holes, Slippage Area(s), Segregated <br />Area(s) and Bleeding; all as defined and footnoted in Table 338-1. <br /> <br />338-5.4 Category 3 Pavement: For purposes of this Specification, "Category 3 <br />Pavement" is defined as median crossovers and shoulders. <br />Threshold values and associated remedial work for Category 3 Value Added <br />Asphalt Pavement are specified in Table 338-3. <br /> <br />TABLE 338-3 <br />Category 3 Condition Survey <br /> <br />Type of Type of Survey Irhreshold Remedial Work <br />Distress Values <br />Rutting N/A N/A N/A <br /> Cumulative <br /> length 0 <br />Cracking Any Survey cracking > 500 See Table 338-1 <br /> feet for Cracks <br /> > 1/8 inch <br />Surface Any Survey See Table 338-1 See Table 338-1 <br />Deterioration (1) <br />(1) Surface Deterioration: As used in Table 338-3, Surface Deterioration includes Raveling <br />and/or Delamination affecting the Friction Course, Pot holes, Slippage Area(s), Segregated <br />Area(s) and Bleeding; all as defined and footnoted in Table 338-1. <br /> <br />338-5.5 Remedial Work: During the warranty period, the Responsible Party will <br />perform all necessary remedial work described within this Section at no cost to the <br />Department. Should an impasse develop in any regard as to the need for remedial work or <br /> <br />09/09 <br /> <br />01000-85 <br /> <br />03-4122.F <br />